A curated selection of maximum value offers!
In cart {{totalProductsCount}} item(s)
Your cart is empty
LED bulb Paulmann 286.67, E14, 4.8 W (440 lm), 2700 K warm white, CRI 80, 15,000 h
Paulmann 286.67 is an E14 LED bulb with 4.8 W power and a luminous flux of 440 lm, producing warm white light at 2700 K with a colour rendering index (CRI) of 80. Its compact drop-shaped crown mirror design emits light in all directions and is intended to replace approximately 38 W incandescent bulbs while offering a rated lifetime of about 15,000 hours and a power factor of 0.9. The bulb fits standard commercial E14 sockets and is suitable for general home lighting in lamps, fixtures and decorative fittings.
The LED technology delivers the same visible brightness as higher-power incandescent bulbs while using only 4.8 W, reducing energy consumption for equivalent lighting. The 2700 K colour temperature provides a soft warm white tone suited to living spaces. The compact drop-shaped design allows installation in small luminaires and decorative fittings where space is limited. A long rated lifetime of around 15,000 hours reduces the need for frequent replacements, and the wide-angle emission ensures even illumination in a variety of fixtures.
Ensure the luminaire is disconnected from mains power before fitting the bulb. Screw the E14 bulb into a compatible socket until secure and restore power. Use in fixtures rated for the bulb's voltage and comply with any dimmer compatibility requirements if using a dimmable circuit. For safe operation, avoid installing the bulb in sealed luminaires not designed for LED bulbs unless the fixture manufacturer allows such use.
For optimal performance, use the bulb in well-ventilated fixtures and avoid covering it with insulating materials. If using with a dimmer, confirm the dimmer is compatible with LED loads to prevent flicker. Replace bulbs as they reach end of life to maintain intended light output and colour quality.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}
Device manufacturer code
Device manufacturer
Rating of how efficiently a device uses energy, affecting power consumption and costs.
A method of describing the color characteristics of light, usually either warm (yellowish) or cool (bluish). Usually measured in degrees of Kelvin (°K).
More energy-efficient light technologies often require less power than original bulb technology. The equivalent bulb power compares the power of a new bulb with the power for an original bulb to produce the same amount of light.
The length of time that the bulb will last for.
Luminous flux or luminous power is the measure of the perceived power of light measured in lumen. The luminous flux is a weighted sum of the power at all wavelengths in the visible band.
The type of fitting (used in pipe plumbing systems to connect straight pipe or tubing sections, to adapt to different sizes or shapes, and for other purposes, such as regulating or measuring fluid flow) or cap (a pipe fitting used to seal the end of a pipe).
The power of the lamp, usually measured in watts (W).
The colour of the light produced by the product.