Outdoor wall light Paulmann 93111 LED 8 W anthracite aluminium 231×103 mm

Paulmann 93111 is an outdoor wall light with an integrated 8 W LED housed in an anthracite aluminium body measuring 231 × 103 × 231 mm. Designed for direct 230 V AC connection, the luminaire provides warm white light at 3000 K and delivers approximately 700 lm with an expected lifetime of around 30,000 hours. The fixture is splash-protected (IP44) and has been tested for seawater resistance, making it suitable for exposed exterior locations such as façades, entrances and pathways. Energy efficiency class F (scale A–G). Supplied as a single unit with integrated electronic controls for automated operation.

Advantages

The integrated LED and aluminium housing provide a compact, low-maintenance solution for outdoor illumination. IP44 protection guards the luminaire against splash water, while seawater resistance testing increases reliability in coastal or industrial environments. The built-in twilight switch and motion sensor enable automatic activation only when needed, reducing energy consumption and extending service life. Warm white light at 3000 K creates visually comfortable exterior accents without complex installation requirements.

Suitable for

• Illuminating building entrances and porches
• Accent lighting on façades and exterior walls
• Pathway and driveway guidance lighting
• Outdoor areas with occasional splash or coastal exposure

Key specifications

• Light source: Integrated LED, 8 W
• Light output: approximately 700 lumens
• Colour temperature: 3000 K (warm white)
• Rated lifetime: approx. 30,000 hours
• Protection rating: IP44 (splash-protected)
• Housing material: aluminium, anthracite finish
• Dimensions: 231 × 103 × 231 mm
• Power supply: 230 V AC direct connection
• Operating modes: continuous light, orientation light, motion sensor
• Additional features: integrated twilight switch, integrated motion detector, seawater-resistance tested

How to use

Connect the Paulmann 93111 directly to a 230 V AC supply following local electrical regulations and ensure the power is switched off before installation. Mount the luminaire on a stable exterior surface at the desired height and route the supply cable through a suitable weatherproof entry. After restoring power the twilight switch will enable automatic dusk activation; the motion sensor and operating mode can be set according to the required behaviour (continuous, orientation or sensor-controlled). Routine cleaning of the housing with a damp cloth and visual inspection of seals will help maintain IP44 protection.

Usage recommendations

For best performance, install the luminaire where the motion sensor can clearly detect movement and avoid mounting beneath overhangs that block ambient dusk light if twilight switching is required. For coastal installations, periodically rinse accumulated salt deposits with fresh water and check fixings and seals. Verify local wiring standards and, if necessary, use a qualified electrician for safe installation.