Outdoor wall lighting Paulmann Flame LED 2.8 W, aluminium housing, anthracite, 65×70×155 mm

Paulmann Flame LED outdoor wall light is a compact surface-mounted luminaire designed for exterior use. The unit features two integrated LED light sources with a combined power of 2.8 W housed in an anthracite aluminium body sized 65×70×155 mm. Intended for AC mains operation, the fixture provides warm white illumination and is built to withstand typical outdoor conditions while maintaining low maintenance requirements.

Advantages

The aluminium housing offers corrosion resistance and a slim form factor that fits façades, entrances and terraces without protruding excessively. Integrated LED modules deliver energy-efficient lighting with long service life and minimal upkeep. IP44 splash protection ensures reliable operation in exposed exterior locations where protection against water splashes is required. The luminaire produces indirect lighting effects that enhance visibility and perimeter safety while preserving subtle architectural appearance.

Suitable for

• Illuminating entrance areas and porches
• Accent lighting for façades and wall surfaces
• Lighting terraces, patios and covered outdoor passages
• Safety and wayfinding near doors and pathways

Key specifications

• Integrated LED light sources, total power 2.8 W
• Housing material: aluminium with anthracite finish
• Product dimensions: 65 × 70 × 155 mm
• Light colour: 3000 K (warm white)
• Luminous flux per luminaire: approximately 290 lm
• Rated lifetime of LEDs: up to 30,000 hours
• Ingress protection: IP44 (splash-protected)
• Power supply: AC mains
• Dimmable (requires compatible dimmer)

How to use

Install the Paulmann Flame luminaire on a vertical exterior wall using appropriate fasteners and a suitable junction box for AC mains connection. Ensure the electrical supply is switched off before making connections and follow local electrical regulations. Position the luminaire at a height and orientation that produce the desired indirect lighting effect on the wall or pathway. After wiring and mounting, restore power and test the light operation and dimming function if a compatible dimmer is used.

Usage recommendations

For optimal performance, mount the luminaire where it is protected from direct heavy rainfall and where splash protection (IP44) is sufficient. Use compatible outdoor-rated dimmers if dimming is required. Periodically clean the aluminium housing with a soft cloth and mild detergent to maintain appearance and check seals if exposed to harsh weather.