Outdoor wall light Paulmann 94452, LED non-changeable bulb 6 W, aluminium, grey, 230 V, 96×128×56 mm

Paulmann 94452 is an outdoor wall light with a fixed 6 W LED lamp integrated into a grey aluminium housing. Designed for direct 230 V connection, the luminaire delivers warm white light at 3000 K and a luminous flux of approximately 500 lm from a non-changeable LED module. The compact dimensions (96 × 128 × 56 mm), splash protection IP44 and rust-resistant aluminium construction make this model suitable for exterior illumination of entrances, facades and terraces where a durable, weather-protected wall luminaire is required.

Advantages

The luminaire offers consistent warm white illumination with low energy consumption thanks to its integrated 6 W LED. IP44 splash protection and an aluminium housing provide reliable weather resistance and corrosion protection for outdoor use. The fixed LED module ensures long operating life (rated up to 30,000 hours) and eliminates the need to buy replacement bulbs, while the direct 230 V AC connection simplifies installation without additional drivers.

Suitable for

• Illuminating house entrances and porches
• Accent lighting for exterior walls and facades
• Lighting small terraces, walkways and stair areas

Key specifications

• Integrated LED power: 6 W
• Light colour: 3000 K (warm white)
• Luminous flux: approx. 500 lm
• Rated lifetime: up to 30,000 hours
• Material: aluminium housing, corrosion-resistant finish
• Ingress protection: IP44 (splash-protected)
• Supply voltage: 230 V AC
• Dimensions: 96 × 128 × 56 mm

How to use

Mount the Paulmann 94452 on a suitable exterior wall surface using appropriate screws and wall plugs for the substrate. Ensure the mains supply is switched off before connecting the fixture to 230 V AC wiring and follow local electrical regulations; wiring should be performed by a qualified electrician if required. After installation and secure electrical connection, switch on the power to check light output and alignment. Avoid installing the luminaire where direct impact of heavy water jets or full immersion may occur.

Usage recommendations

For optimal performance, mount the luminaire at a height that provides uniform illumination of the entrance or wall surface, typically 1.8–2.2 m above floor level. Clean the aluminium housing periodically with a soft cloth to remove dirt and check seals to maintain IP44 protection. Use the product for outdoor ambient and accent lighting; do not attempt to open or replace the integrated LED module.