Paulmann 94453 outdoor lighting Outdoor wall lighting Non-changeable bulb(s) LED 6 W F

The Paulmann 94453 Capea is an outdoor wall luminaire designed for exterior use on facades and entrances. Constructed from aluminium with a grey finish and rated IP44, the fixture provides splash protection and corrosion resistance. The integrated LED module delivers 6 W of power at 230 V and emits warm white light at 3000 K, while a built-in motion detector switches the luminaire on automatically when movement is detected in low light conditions.

Advantages

The aluminium housing ensures durability and rust resistance for outdoor exposure, while the IP44 rating protects the luminaire from splashes and weather. The integrated LED offers long operating life with consistent color temperature and energy-efficient light output. The motion detector provides convenience and increased safety by activating lighting only when needed, reducing energy consumption compared with continuously running fixtures.

Suitable for

• Illuminating building facades and entrance areas
• Pathway and doorstep lighting where automatic activation is required
• Outdoor wall-mounted accent lighting for residential or light commercial exteriors

Key specifications

• Mounting type: Wall-mounted outdoor luminaire
• Light source: Integrated non-changeable LED, 6 W
• Luminous flux: 500 lm (nominal)
• Color temperature: 3000 K (warm white)
• Input voltage: 230 V AC
• Protection class: IP44 (splash-protected)
• Housing material and colour: Aluminium, grey
• Dimensions (W×D×H): 96 × 153 × 165 mm
• Integrated motion detector for automatic switching

How to use

Install the luminaire on a suitable exterior wall with access to a 230 V supply point, following local electrical regulations and using appropriate mounting hardware and seals to maintain the IP44 protection. Connect the fixture to the mains supply and ensure the motion detector is positioned to detect approach to the intended area. The integrated LED and sensor are pre-fitted; no separate bulb installation is required. For safety, switch off the power at the circuit breaker before any wiring work and, if unsure, use a qualified electrician.

Usage recommendations

Position the luminaire at a height and angle that gives optimal sensor coverage of pathways or entry points without direct exposure to heavy water jets. Regularly check seals and mounting for damage and clean the aluminium surface with a soft cloth to maintain performance. For longer life and reliable operation, avoid covering the sensor with objects or paint.