Paint PENTACOLOR Acryl 7 White — PENTACOLOR, emulsion acrylic paint, 122

PENTACOLOR Acryl 7 White is an emulsion acrylic paint formulated for interior decorative and protective coatings. This water-based paint delivers a white finish suitable for walls and ceilings in residential and commercial spaces. It is compatible with brush, roller and spray application methods and designed to provide even coverage and a durable surface when applied to properly prepared substrates.

Advantages

The paint combines acrylic binder technology with a water-based formulation to offer good adhesion, ease of application and relatively quick drying. Its white tint provides uniform coverage and a neutral base for interior environments. The emulsion is low-odour compared with solvent-based coatings and can be cleaned from tools and hands with water prior to drying.

Suitable for

• Interior walls and ceilings in homes and apartments
• Commercial interiors such as offices, retail and hospitality spaces
• Renovation projects requiring a white, neutral topcoat
• Surfaces prepared with appropriate primers and undercoats

Key specifications

• Type: water-based acrylic emulsion paint
• Finish color: white
• Application methods: brush, roller, spray
• Suitable substrates: properly prepared interior plaster, drywall, concrete and primed surfaces
• Drying behavior: quick drying under normal indoor conditions (ensure adequate ventilation)

How to use

Ensure surfaces are clean, dry and free from loose material, grease or mould. Repair cracks and sand glossy areas, then apply a suitable primer if required for adhesion and to level absorbency. Stir the paint thoroughly before use. Apply with a brush, roller or spray gun in even coats, allowing recommended drying time between coats. Follow the manufacturer’s guidance for thinning, if spraying, and for the number of coats needed to achieve full coverage.

Usage recommendations

Use at stable indoor temperatures and avoid painting in very high humidity or near open windows during adverse weather. For best results, test a small area first to confirm adhesion and coverage on the chosen substrate. Clean tools with water immediately after use.