Emulsion Paint PENTACOLOR Acryl 7 White — interior water-based acrylic emulsion paint

PENTACOLOR Emulsion Paint Acryl 7 White is an interior water-based acrylic emulsion paint formulated for walls and ceilings. The white finish delivers a matt to low-sheen appearance that improves light reflection in residential and commercial interiors. The formulation is suitable for previously primed surfaces and common indoor substrates where a washable, neutral white coating is required. Application is simple with a brush or roller and the paint dries to an even, uniform surface that accepts decor and maintenance cleaning.

Advantages

The acrylic-based, water-borne composition provides good adhesion, minimal odour during application and a balanced drying time that supports even coverage. The matt/low-sheen white finish conceals minor surface imperfections while maintaining light-reflective properties. The paint is washable and designed for interior conditions, offering a durable surface for typical room use without the need for solvent-based thinning.

Suitable for

• Interior walls in homes and apartments
• Ceilings in living rooms, hallways and offices
• Primed plaster, drywall (gypsum board) and previously painted surfaces
• Areas requiring a washable white finish with moderate traffic

Key specifications

• Finish: matt to low-sheen white
• Base: water-based acrylic emulsion
• Suitable substrates: primed plaster, drywall, painted surfaces
• Application methods: brush, roller (spray application may be possible depending on equipment)
• Drying: surface dry and recoatable within typical interior paint drying times (ambient conditions affect times)
• Clean-up: water

How to use

Ensure surfaces are clean, dry and free from loose material, dust or grease. Repair cracks and sand uneven areas; apply a suitable primer on new or highly absorbent substrates and allow it to dry fully. Stir the paint thoroughly before use to achieve uniform consistency. Apply with a quality brush or roller in even strokes, maintaining a wet edge to avoid lap marks. Allow the recommended drying time between coats and apply additional coats as needed to achieve uniform coverage and colour depth. Clean tools with water immediately after use.

Usage recommendations

For best results, apply at moderate room temperature and humidity; avoid painting in direct sunlight or on very damp surfaces. Test a small area to confirm adhesion and appearance on the specific substrate. Use a matching primer on highly absorbent or repaired areas to ensure even absorption and colour uniformity.