Paint PENTACOLOR EMUL PAINT ULTRA 10 White — emulsion paint, 5 L

PENTACOLOR EMUL PAINT ULTRA 10 White is a water-based emulsion paint supplied in a 5 L container for interior use. It provides a neutral white shade suitable for walls and ceilings in living spaces, offices and public interiors. The formulation is designed for application with a brush, roller or sprayer and offers a washable, durable finish intended for general-purpose repainting and new decoration of interior surfaces.

Advantages

The emulsion formulation ensures easy application and consistent coverage on prepared surfaces. The water-based composition allows for low-odour application and fast drying compared with solvent-based paints. The paint yields a washable surface that withstands routine cleaning and light abrasion, helping maintain a uniform appearance over time. Its neutral white tone provides good light reflection and integrates with a wide range of interior colour schemes.

Suitable for

• Interior walls in residential rooms and apartments
• Ceilings in living areas and corridors
• Office walls and common areas in commercial premises
• Public interiors such as waiting rooms and municipal buildings
• Repainting previously painted plaster, drywall and masonry after proper preparation

Key specifications

• Type: water-based emulsion paint
• Finish: washable, medium-sheen (suitable for walls and ceilings)
• Colour: neutral white
• Volume: 5 litres
• Application methods: brush, roller, airless or conventional sprayer
• Drying: touch-dry within hours depending on temperature and ventilation
• Coverage: typical coverage per litre depends on substrate porosity and application method

How to use

Ensure surfaces are clean, dry and free of loose material, grease or mould. Repair cracks and fill holes, then sand smooth and remove dust. Prime highly absorbent or repaired areas with a suitable primer according to substrate requirements. Stir the paint thoroughly before use and, if necessary, thin slightly with water following the manufacturer's recommendations for spraying. Apply evenly with a brush, roller or sprayer, maintaining a wet edge to avoid lap marks. Allow adequate drying time between coats; apply a second coat when required to achieve uniform coverage and colour.

Usage recommendations

Store and apply at recommended ambient temperatures and ensure good ventilation during drying. Test a small area before full application to verify adhesion and final appearance on the specific substrate. Clean tools with water immediately after use.