PENTACOLOR Pentafloor grey 2.7 L is a water-based floor paint designed for coating interior and suitable exterior floor surfaces. Supplied in a 2.7‑liter can, this grey floor coating creates a protective decorative layer on concrete, wooden or previously painted floors. The formula restores and improves the durability and appearance of walkable surfaces in homes, garages, balconies and utility spaces while allowing for practical maintenance and wear resistance typical of water-based coatings.
Advantages
The water-based composition ensures low odour during application and faster drying compared with solvent-based alternatives. The paint provides good adhesion to prepared concrete, wood and previously painted substrates and yields an even, matte-to-semi-matte grey finish that conceals minor imperfections. Its film forms a wear-resistant layer suitable for foot traffic and light wheeled loads, and the product can be applied with brush, roller or suitable spray equipment for uniform coverage.
Suitable for
- Interior floors such as basements, utility rooms and living spaces
- Garages and workshops with pedestrian and light vehicle movement
- Balconies and covered exterior areas where water-based coatings are appropriate
- Wooden floors and stairs previously sanded or primed
- Previously painted concrete floors in need of renovation and protection
Key specifications
- Volume: 2.7 litres
- Base: water-based (acrylic) formulation
- Colour: grey
- Finish: low-sheen to semi-matte
- Suitable substrates: concrete, wood, previously painted surfaces
- Application methods: brush, roller, spray
- Intended use: interior and suitable exterior floor surfaces exposed to foot traffic
How to use
Ensure the surface is clean, dry and free of grease, dust and flaking paint. Repair cracks and fill holes, then sand glossy or uneven areas to promote adhesion. Stir the paint thoroughly before use. Apply one or two coats depending on substrate porosity and desired opacity, allowing recommended drying time between coats. Use a suitable brush or roller for edges and large flat rollers for general coverage; spray application may be used following equipment manufacturer guidelines. Maintain proper ventilation during application and drying.
Usage recommendations
For best results, test the paint on a small inconspicuous area first to confirm adhesion and final shade. On highly absorbent or chalky surfaces, apply a suitable primer before Pentafloor. Avoid heavy mechanical loads and prolonged water pooling on newly painted surfaces until the coating has fully cured.
