Exterior Facade Paint PENTACOLOR Villa Novus Anthracite 3L

PENTACOLOR Villa Novus Anthracite is an exterior facade paint supplied in a 3 L container, formulated for use on masonry, plaster and previously painted exterior surfaces. The anthracite shade provides a dark, neutral finish suitable for modern and traditional buildings. The formulation is intended for façade renovation and new construction, offering a protective color coat that resists weathering on outer walls.

Advantages

This facade paint delivers even coverage and good hiding power in a single-colour anthracite shade, reducing the number of coats needed. The water-dispersible acrylic-based formula is formulated for exterior durability, providing resistance to rain and sun exposure while allowing the substrate to breathe. The 3 L packaging is practical for small to medium wall areas and for touch-up work during renovation.

Suitable for

• Masonry surfaces such as concrete and brick
• Rendered or plastered exterior walls
• Previously painted façades requiring recoloring or refresh
• Small façades, accents and repair patches on buildings

Key specifications

• Colour: Anthracite (dark grey)
• Volume: 3 litres
• Application: Exterior facade use
• Suitable substrates: masonry, plaster, previously painted surfaces
• Finish: opaque colour coating

How to use

Ensure the surface is clean, dry and free of loose paint, dust and grease before application. Repair cracks or damaged areas and prime highly absorbent substrates if necessary. Stir the paint thoroughly before use. Apply with a brush, roller or suitable spray equipment in even coats, maintaining recommended drying times between coats as indicated on the technical data sheet. For best results on dark anthracite tones, apply evenly and consider two thin coats rather than one thick coat to avoid lap marks and ensure uniform coverage.

Usage recommendations

Store unopened containers in a cool, frost-free place. Apply at temperatures recommended for exterior paints (typically above 5°C) and avoid painting in direct rain or strong wind. Test a small area first to confirm colour and adhesion on your substrate. Clean tools with water immediately after use.