Paint PENTACOLOR ANTICOR anti-rust red 0.9 L

PENTACOLOR ANTICOR anti-rust red 0.9 L is a protective anticorrosive paint formulated for application on ferrous metal surfaces. Supplied in a compact 0.9-litre container, this red coating is intended to form a barrier against moisture and oxidation on steel and iron parts. It can be used as a primer layer or as a finishing coat on outdoor and indoor metal structures, providing durable surface protection where rust prevention is required.

Advantages

The paint offers corrosion-inhibiting properties that slow the formation of rust and extend the service life of metal parts. Its formulation ensures good adhesion to cleaned steel and iron, as well as uniform coverage and predictable drying behavior. The red colour provides clear visual identification of treated areas and can be overcoated with compatible topcoats if desired. The 0.9 L size balances sufficient coverage for small to medium tasks with ease of handling and storage.

Suitable for

• Metal gates and fences
• Machinery and agricultural equipment
• Structural steel elements and metal frames
• Iron railings and balustrades
• Repair and maintenance of painted metal surfaces

Key specifications

• Volume: 0.9 litres
• Type: anticorrosive (anti-rust) paint
• Colour: red
• Intended substrates: steel and iron
• Application: brush, roller or spray (depending on equipment)
• Finish: protective coating suitable as primer or topcoat

How to use

Prepare the metal surface by removing loose rust, dirt, oil and old flaking paint using mechanical methods or a wire brush, then degrease and dry the surface thoroughly. Stir the paint well before application to ensure uniform consistency. Apply one or more coats depending on required protection, allowing adequate drying time between coats according to ambient temperature and ventilation. For best results, maintain recommended film thickness and ensure good ventilation during drying. Clean tools with a suitable solvent after use.

Usage recommendations

For optimal corrosion protection, apply on clean, dry metal and consider using a compatible primer or intermediate coat when treating heavily corroded or structural elements. Store the container tightly closed in a cool, frost-free place and follow safety instructions on ventilation and personal protective equipment during application.