Floor paint PENTACOLOR Pentafloor Beton Red-Brown 2.7 L – concrete floor coating

PENTACOLOR Pentafloor Beton Red-Brown 2.7 L is a floor paint formulated for use on concrete surfaces. Supplied in a 2.7‑litre container and tinted red‑brown, this coating is intended to protect and improve the appearance and wear resistance of indoor and outdoor concrete floors such as garage slabs, basement floors, walkways and light industrial areas. The product provides a uniform coloured finish that helps resist abrasion and everyday traffic on properly prepared concrete.

Advantages

This concrete floor coating offers a durable coloured film that enhances surface protection and wear resistance. The red‑brown tint conceals minor surface imperfections while delivering consistent colour across treated areas. The product is supplied ready for application after standard surface preparation, and it is suitable for both interior and exterior concrete where a protective, decorative layer is required.

Suitable for

• Garage floors and driveways with concrete substrate
• Basement and cellar concrete floors
• Walkways, patios and outdoor concrete surfaces
• Light industrial floors and storage areas with moderate traffic

Key specifications

• Volume: 2.7 litres
• Surface: concrete
• Finish: coloured protective coating (red‑brown)
• Application area: interior and exterior
• Primary functions: protection, wear resistance, surface improvement

How to use

Ensure the concrete surface is clean, dry and free of grease, oil, loose particles and salts before application. Repair cracks and uneven areas and allow repairs to cure. Stir the paint thoroughly before use. Apply with a brush, roller or suitable spray equipment in accordance with recommended film thickness and drying times shown by the manufacturer. Allow the first coat to dry fully before applying additional coats to achieve the desired coverage and durability. Follow local ventilation and safety guidelines during application and drying.

Usage recommendations

For best results, prepare surfaces by mechanical abrasion or pressure washing to remove laitance and lift contaminants, and follow manufacturer instructions for ambient conditions and drying times. Use on well‑drained exterior surfaces and avoid application at temperatures and humidity levels outside the product’s specified range. Consider performing a small test area to confirm adhesion and final appearance on the specific concrete substrate.