Floor paint PENTACOLOR PAINT PENTAFLOOR BETON C 0.85L — 0.85 L water-based concrete floor paint

PENTACOLOR PAINT PENTAFLOOR BETON C 0.85L is a water-based floor paint formulated specifically for interior concrete and cement surfaces. Supplied in a 0.85 litre tin, the product is intended to coat and protect floors in garages, basements, workshops and utility rooms. The formulation improves surface resistance to wear and common household chemicals while providing a durable, easy-to-clean finish suitable for light to moderate foot traffic.

Advantages

The water-based composition reduces odour and allows for easier cleaning of tools compared with solvent-based paints. The paint creates a protective film that increases abrasion resistance and helps prevent dusting on concrete floors. Quick drying and good adhesion to prepared concrete surfaces enable efficient application and faster return to service. The finish is washable and maintains an even appearance on level cement substrates.

Suitable for

• Garage and parking areas with light vehicle and foot traffic
• Basements and cellars
• Home workshops and hobby rooms
• Utility rooms, storage areas and service rooms

Key specifications

• Volume: 0.85 litre
• Type: water-based acrylic floor paint
• Intended substrate: interior concrete and cement floors
• Finish: protective, washable coating
• Performance: improves abrasion and chemical resistance for light to moderate traffic
• Application: brush, roller or suitable spray equipment

How to use

Ensure the concrete surface is clean, dry and free of dust, grease, loose particles and curing compounds. Repair cracks and level uneven areas before painting. Stir the paint thoroughly before use. Apply one or two coats depending on substrate porosity and required coverage, allowing recommended drying time between coats. Use a brush or roller for small areas and a short-pile roller or suitable spray for larger surfaces. Maintain recommended ambient conditions during application and curing as indicated on the product label.

Usage recommendations

For best results, carry out a small test patch to verify adhesion and appearance on the particular concrete surface. Follow substrate preparation guidelines, ensure adequate ventilation while drying, and avoid heavy traffic until the coating has fully cured.