Paint Pentacolor Antirust Hammered Brown 2.5L – rust‑inhibiting metal paint

Pentacolor Antirust Hammered Brown 2.5L is a rust‑inhibiting paint formulated for metal surfaces. The water‑resistant coating creates a textured hammered finish that conceals minor surface imperfections while delivering a protective barrier against corrosion. Supplied in a 2.5‑litre volume and presented in a brown shade, this paint is intended for exterior and interior metal objects where durable anticorrosive performance and an even textured appearance are required.

Advantages

This paint combines rust‑inhibiting properties with a hammered texture that reduces the visibility of scratches, small dents and uneven substrate. It forms a protective film that resists moisture and typical outdoor exposure, reducing the need for frequent maintenance. The formulation adheres to ferrous substrates and provides an even brown finish in one coat or two thin coats depending on surface porosity and previous treatments.

Suitable for

• Gates and fences
• Railings and balconies
• Radiators and heating pipes (when compatible with operating temperatures)
• Garden furniture and metal fixtures
• Small metal repairs and decorative metalwork

Key specifications

• Volume: 2.5 litres
• Colour: brown with hammered textured finish
• Type: rust‑inhibiting metal paint
• Finish: textured hammered surface that conceals minor imperfections
• Application: suitable for exterior and interior metal surfaces
• Coverage: depends on substrate porosity and application method

How to use

Ensure the metal surface is clean, dry and free from loose rust, grease and old flaking paint. Remove heavy rust by mechanical means (wire brush or sanding) and degrease the surface if necessary. Stir the paint thoroughly before use. Apply with a brush, roller or spray gun in thin, even coats, allowing adequate drying time between coats. For best anticorrosive protection, apply one or two coats depending on surface condition. Follow local ventilation and drying recommendations when painting indoors.

Usage recommendations

For durable results, paint on bare metal after thorough surface preparation or over a compatible primer on previously coated surfaces. Test adhesion on a small area if the existing coating is unknown. Observe manufacturer guidance for drying times, recoating intervals and temperature limits during application.