Paint Pentacolor Aquamel Red 0.7 kg, matt finish

Water-based Aquamel paint by PENTACOLOR in red, supplied in a 0.7 kg container with a matt finish. Designed for interior use on prepared walls, ceilings and suitable wooden or primed metal substrates, this matt red emulsion offers uniform colour coverage with low sheen and straightforward water-based application. The formulation is intended to provide a durable finish for everyday indoor surfaces while allowing cleaning and tool maintenance with water.

Advantages

Aquamel Red delivers even opacity and a consistent matt appearance that reduces glare on interior surfaces. The water-based composition ensures easier application and faster tool cleaning compared with solvent-based coatings. The paint is formulated for good adhesion to common interior substrates when surfaces are properly prepared and primed, and it dries to a low-sheen finish suitable for rooms where reduced reflection is preferred.

Suitable for

• Interior walls and ceilings
• Prepared wooden surfaces (interior)
• Primed metal surfaces indoors
• Rooms where a matt, low-reflective finish is desired

Key specifications

• Type: water-based emulsion paint
• Finish: matt (low sheen)
• Colour: red
• Pack size: 0.7 kg container
• Application: brush, roller or airless/air-assisted spray
• Suitable substrates: prepared interior walls, ceilings, primed wood and metal
• Cleaning: water-soluble before drying

How to use

Ensure all surfaces are clean, dry and free from dust, grease and loose material. Repair any cracks or holes and sand smooth. For new or porous substrates apply a suitable primer and allow it to dry fully. Stir the paint thoroughly before use and adjust viscosity with water only if necessary, following manufacturer dilution guidance. Apply evenly using a brush, roller or spray equipment in thin coats, allowing each coat to dry before applying the next. Maintain recommended drying times and ventilation for best results.

Usage recommendations

Store containers tightly closed in a cool, frost-free place. Use protective equipment as required for indoor painting and ventilate the area during application and drying. Perform a test patch on a small area to confirm adhesion and colour appearance on the intended substrate before full application.