Frame anchor PGB KRP 10×200KL hex head screw, 10×200 mm, for fastening into concrete and masonry

Frame anchor PGB KRP 10×200KL hex head screw, 10×200 mm, is a mechanical expansion anchor engineered for fastening frames, profiles and structural elements into concrete and masonry. The anchor features a hex head for wrench installation and an expanding sleeve that engages the drilled hole to create a reliable load-bearing connection. Designed for use where base material and drilling parameters match the anchor size, this anchor is suitable for many construction and renovation applications both indoors and outdoors when installed according to recommendations.

Advantages

The hex head design allows for secure torque application with standard sockets or wrenches, providing consistent setting of the anchor. Mechanical expansion ensures immediate load transfer after installation without chemical adhesives. The 10×200 mm length gives sufficient embedment depth for medium to heavy frame fixings in solid concrete and certain types of masonry. Corrosion-resistant surface treatment increases durability in appropriate environments when used as specified.

Suitable for

• Fixing door and window frames to concrete and solid masonry
• Mounting steel profiles, brackets and supports
• Securing structural elements in renovation and retrofit work
• Indoor and outdoor fastenings where base material meets anchor requirements

Key specifications

• Anchor type: mechanical expansion, hex head screw anchor
• Diameter × length: 10 × 200 mm
• Material: metal anchor with expansion sleeve (surface treated for corrosion resistance)
• Suitable base materials: solid concrete and solid masonry (check substrate condition before use)
• Installation method: drilled hole with torque-driven setting
• Use environment: indoor and outdoor where corrosion protection is adequate

How to use

Drill a hole of the correct diameter and depth in the base material, ensuring the hole is clean and free of dust. Insert the anchor into the hole until the head sits flush with the element to be fastened. Apply torque using a wrench or socket until the expansion sleeve engages the base material; follow recommended torque values for the substrate to avoid over- or under-tightening. Ensure the anchor is fully seated and the connected element is correctly aligned before applying service loads.

Usage recommendations

Verify base material suitability and structural requirements prior to installation. Use appropriate drill bits for concrete or masonry and clean holes with compressed air or brush. Adhere to recommended embedment depth, edge and spacing distances to achieve rated load performance. For critical or load-bearing connections, consult structural guidance or perform testing. Avoid use in hollow or weak substrates unless specified for that condition.