Outdoor wall light Philips myGarden Arbour 4.5W LED, aluminium, black, 220–240V, 2 integrated LEDs, 127×130×130 mm

Philips myGarden Arbour 4.5W LED outdoor wall light is a compact aluminium fixture in black designed for façade and accent illumination. The luminaire integrates two non-changeable LEDs rated at 4.5 W total and operates from a 220–240 V, 50–60 Hz supply. Measuring 127×130×130 mm, the housing provides a sturdy, weather-resistant appearance and casts directed warm-white beams both upward and downward to highlight porches, pathways and terrace walls.

Advantages

The aluminium construction ensures durable outdoor performance while maintaining a lightweight profile. Two integrated LEDs deliver uniform warm-white illumination with low energy consumption and minimal maintenance because the light source is built in. The compact cubic design concentrates light output into two directional beams for effective accenting of vertical surfaces without excessive glare. Installation is straightforward on standard outdoor junction boxes and the IP-rated enclosure is appropriate for exterior use.

Suitable for

• Façade accent lighting for houses and apartment entrances
• Illuminating porches and entryways
• Lighting short pathway sections or terraces
• Highlighting architectural features and wall textures

Key specifications

• Material: die-cast aluminium housing with weather-resistant finish
• Finish color: black/anthracite grey
• Light source: 2 integrated LEDs, non-replaceable
• Power consumption: 4.5 W (total)
• Supply voltage: 220–240 V, 50–60 Hz
• Beam orientation: up and down directional beams
• Dimensions: 127 × 130 × 130 mm (height × width × depth)

How to use

Mount the fixture on an appropriate outdoor junction box or wall surface using the supplied mounting points and screws; ensure the mains supply is turned off before installation. Connect the fixture to a 220–240 V supply following local electrical codes and secure all cable entries to maintain the enclosure’s resistance to moisture. Position the light so the upward and downward beams fall on the desired wall areas; ideal mounting height is approximately 1.8–2.2 m above ground for general accenting. After power is restored, the integrated LEDs will provide immediate warm-white illumination with no warm-up time.

Usage recommendations

For consistent exterior performance, clean the aluminium surface periodically with a soft cloth and mild detergent, avoid abrasive cleaners, and check seals and cable entries annually. Use the fixture in conjunction with compatible dimmers only if specified by Philips for this model; otherwise operate at full mains voltage. When designing lighting for pathways or safety illumination, combine Arbour units with lower-mounted bollards or step lights to achieve even coverage.