LED bulb Philips 7.3 W E27 A60 — 1535 lm, Warm white, CRI 80, 50,000 h

Philips LED bulb 7.3 W with an E27 cap provides bright, energy-efficient general lighting equivalent to a 100 W incandescent lamp. Delivering 1535 lm of warm white light (approximately 2700 K) with a wide 300° beam and a Color Rendering Index (CRI) of 80, this A60-shaped lamp is designed for long service life and steady performance in household and commercial fixtures. The lamp is rated for a long lifetime of 50,000 hours and operates with a low power draw of 7.3 W.

Advantages

This LED bulb combines high luminous efficacy with a warm-white light output suitable for everyday spaces. Its wide beam angle offers even illumination for rooms and fittings, while the long rated lifetime and low power consumption reduce maintenance and energy costs. The CRI 80 ensures acceptable color rendering for general-purpose lighting applications, and the standard E27 fitting makes the bulb compatible with a wide range of lamps and ceiling fixtures.

Suitable for

• General room lighting in living rooms, bedrooms and kitchens
• Table lamps, floor lamps and pendant fixtures with E27 sockets
• Commercial spaces requiring warm, ambient illumination such as cafes, offices and hotel corridors

When it may not be suitable

This bulb is not intended for applications that require high color accuracy or professional color-critical work due to its CRI of 80. It may also be unsuitable where very cold (daylight) color temperatures or directional spot lighting are required, since it provides warm white, wide-angle illumination.

Key specifications

• Fitting/cap type: E27
• Rated power: 7.3 W
• Luminous flux: 1535 lm
• Light color: Warm white (approx. 2700 K)
• Beam angle: up to 300°
• Color Rendering Index (CRI): 80
• Rated lifetime: 50,000 hours
• Suitable mains frequency: 50–60 Hz

How to use

Turn off power to the fixture before replacing bulbs. Screw the Philips LED bulb into an E27 socket until secure and restore power. Use the bulb in fixtures and lamps designed for A60-shaped lamps and avoid enclosed fittings unless the fixture specifications state compatibility with LED lamps. For best results, pair the bulb with compatible dimmers only if specified by the fixture or dimmer manufacturer; otherwise use it in non-dim circuits.

What to consider before purchase

• Ensure the fixture accepts an E27 A60 bulb and provides adequate ventilation if enclosed.
• Check whether your setup requires dimmable bulbs—this product is described for standard use and may not support dimming unless specified.
• Confirm required light color and CRI for the intended task; CRI 80 is suitable for general lighting but not for color-critical work.

Usage recommendations

For home ambient lighting choose locations where warm white, broad-beam illumination is preferred—living rooms, bedrooms and dining areas. Replace older incandescent 100 W bulbs with this 7.3 W Philips LED to reduce energy consumption while maintaining similar light output. Avoid using in sealed fixtures unless the fixture documentation confirms LED compatibility.