LED bulb Philips A60 8721103134813 — 7.3 W (E27), 1535 lm, Warm white, CRI 80, 50,000 h

Philips A60 LED bulb with an E27 cap produces 1535 lumens while consuming 7.3 W, delivering an energy-efficient replacement for a traditional 100 W incandescent. The lamp emits warm white light (approximately 2700 K) with a wide 300° beam and a colour rendering index (CRI) of 80. Designed for general household lighting, this bulb offers a long rated lifetime of up to 50,000 hours and steady luminous output suitable for a variety of fixtures that accept an E27 base.

Advantages

The bulb combines low energy consumption with high luminous efficacy, providing bright ambient illumination at a small fraction of the power of an incandescent lamp. Its wide beam angle ensures even light distribution in ceiling fittings, table lamps and open luminaires. A rated lifetime up to 50,000 hours reduces the need for frequent replacements, while the warm white light and CRI 80 sustain natural-looking colours for everyday indoor tasks.

Suitable for

• General room lighting in living rooms, bedrooms and kitchens
• Table and floor lamps with E27 fittings
• Open and semi-enclosed luminaires where a wide beam is desired
• Areas where long-life, low-maintenance lighting is preferred

When it may not be suitable

This bulb provides warm white light with a CRI of 80, which is adequate for most household uses but may not meet requirements for colour-critical tasks such as professional photo editing, colour grading or retail display where higher CRI is preferred. The design and rated beam angle are optimised for general illumination; it is not intended as a focused spotlight for accent lighting.

Key specifications

• Cap / fitting: E27
• Power consumption: 7.3 W
• Luminous flux: 1535 lm
• Beam angle: up to 300°
• Light appearance: Warm white (around 2700 K)
• Colour Rendering Index (CRI): 80
• Rated lifetime: up to 50,000 hours
• Supply frequency: 50–60 Hz
• Energy use example: approx. 8 kWh (refer to local measurement conditions)

How to use

Switch off power to the luminaire before installing the bulb. Screw the Philips A60 LED bulb into any compatible E27 socket until secure. Restore power and operate using a standard on/off switch. The bulb is suitable for continuous use in normal household fixtures; avoid enclosures that completely seal the lamp unless the fixture manufacturer specifies compatibility. Do not use with dimmers unless the product packaging explicitly states dimmer compatibility.

What to consider before purchase

• Confirm your fixture accepts an E27 base and has sufficient clearance for an A60 shaped bulb.
• Verify whether you require a higher CRI for colour-critical tasks.
• Check if the luminaire is fully enclosed or requires a bulb rated for enclosed fixtures.
• Determine if dimming functionality is needed and choose a listed dimmable model if so.

Usage recommendations

Use the Philips A60 LED bulb for reliable, energy-efficient ambient lighting in rooms and fixtures that require an E27 fitting; replace multiple incandescent lamps with these LEDs to reduce energy consumption while maintaining warm, evenly distributed light.