Wood Stain PINOTEX CLASSIC OREGON PINE AE 10L — PINOTEX, 10 Litre

PINOTEX CLASSIC OREGON PINE AE 10L is a ready-to-use wood stain formulated for both exterior and interior wood surfaces. Supplied in a 10-litre container, this PINOTEX wood stain gives pine-coloured tones while penetrating the wood to protect against moisture and UV-induced fading. It is suitable for visible wooden elements where the natural grain and texture should remain perceptible after treatment.

Advantages

This wood stain combines protection and decorative finish in a single product. It penetrates into the wood to reduce the risk of swelling and cracking, while the pigmented formula provides uniform colour and improved resistance to sunlight. The ready-to-use consistency ensures straightforward application and consistent coverage across vertical and horizontal surfaces. It is formulated to preserve the natural appearance and texture of pine and similar woods.

Suitable for

• Exterior cladding and siding
• Wooden fences and gates
• Garden furniture and pergolas
• Wooden facades and trim

Key specifications

• Volume: 10 litres
• Colour tone: Oregon Pine (pine tone)
• Type: Ready-to-use pigmented wood stain
• Application areas: exterior and interior wood surfaces
• Finish: translucent, preserves wood texture and grain

How to use

Ensure the wood surface is clean, dry and free from dust, grease and old flaking coatings. Stir the container thoroughly before use to achieve an even pigment distribution. Apply the stain evenly with a brush, roller or spray equipment following the wood grain. Allow adequate drying time between coats according to temperature and humidity; apply additional coats when deeper colour or increased protection is required. Remove any surplus stain and clean tools with an appropriate solvent or water if the product is waterborne.

Usage recommendations

Test the stain on a small, inconspicuous area to confirm colour and absorption on the specific wood species. For exterior applications, plan for regular maintenance inspections and reapplication as needed to maintain protection and appearance, especially in exposed locations.