Wood Stain PINOTEX EXTREME LASUR Palisander 1 L

PINOTEX EXTREME LASUR Palisander 1 L is a translucent wood stain formulated for both exterior and interior timber surfaces. The lasur penetrates into the wood to provide an even palisander tint while maintaining visible wood grain and texture. It is intended for use on doors, cladding, fences and garden structures where a semi-transparent protective finish and UV resistance are required.

Advantages

This wood stain combines deep penetration with a thin-film surface effect to protect timber from moisture and sunlight without obscuring the natural structure of the wood. The formulation offers color stability against weathering and reduces the risk of cracking and flaking compared with thicker opaque coatings. Easy to apply by brush, roller or spray, the product dries to a uniform finish and can be recoated to increase protection or refresh color.

Suitable for

• Exterior timber cladding and facades
• Wooden doors and window frames
• Fences, gates and pergolas
• Garden furniture and outdoor structures

Key specifications

• Volume: 1 litre
• Finish: translucent / semi-transparent
• Color tone: palisander (brown-red hue)
• Application methods: brush, roller, airless spray
• Surface effect: preserves visible wood grain and texture
• Suitable surfaces: softwood and hardwood prepared for staining
• Resistance: designed to reduce UV-induced fading and weathering

How to use

Ensure the wood surface is clean, dry and free of dust, grease and loose particles. Sand smooth any rough areas and remove sanding dust before application. Stir the product thoroughly before use. Apply evenly along the wood grain using a brush, roller or airless sprayer. Allow the first coat to penetrate and dry according to ambient temperature and humidity before applying a second coat if increased protection or deeper color is required. Clean tools with the appropriate solvent or water as indicated by local use instructions.

Usage recommendations

For best results, apply at temperatures recommended for wood coatings and avoid application in direct rain or extreme heat. Test the product on a small inconspicuous area or a sample piece of the same timber to confirm color and absorption characteristics. Regular inspection and maintenance coatings will extend the service life of the finish in exposed locations.