PINOTEX ULTRA REDWOOD EU 10L is a 10-litre wood stain formulated for protection and decoration of timber surfaces. Suitable for both exterior and interior applications, this semi-transparent finish preserves natural wood texture and grain while providing resistance to weathering and moisture. The product is designed for use on cladding, fences, doors, windows and garden wood, and can be applied with a brush, roller or spray to achieve an even, controlled coating.
Advantages
The semi-transparent formulation allows the natural wood pattern to remain visible while delivering protective pigments and binders that slow UV degradation and water penetration. PINOTEX ULTRA REDWOOD EU 10L adheres well to sound, prepared timber and forms a durable film that reduces surface cracking and discoloration. Its compatibility with brush, roller and spray application methods enables flexible use for both small repairs and large surface treatments.
Suitable for
- Exterior cladding and façade timber
- Garden fences and posts
- Doors, window frames and trim
- Sheds, pergolas and outdoor furniture
- Interior timber surfaces where a semi-transparent decorative finish is desired
Key specifications
- Volume: 10 litres
- Finish: Semi-transparent
- Application methods: Brush, roller, spray
- Suitable surfaces: Softwood and hardwood, previously stained or bare timber (properly prepared)
- Protection: Weathering and moisture resistance with UV-filtering pigments
How to use
Ensure timber surfaces are clean, dry and free from dust, grease, loose paint or fungal growth before application. Stir the stain thoroughly before and during use. Apply evenly with a brush, roller or spray, following wood grain for best appearance. Allow adequate drying time between coats as indicated by ambient temperature and humidity; if a deeper shade or enhanced protection is required, apply a second coat after the first has dried. Test on a small inconspicuous area to confirm appearance and absorption on the specific wood type.
Usage recommendations
For best long-term protection, apply the product on a dry substrate at temperatures recommended by the manufacturer and perform periodic maintenance inspections. Repair damaged areas and recoat when surface wear or loss of film integrity is observed to maintain protection and appearance.
