Wood paint PINOTEX WOODPAINT EXTREME BW 2.5L – exterior/interior wood coating, 2.5 L

PINOTEX WOODPAINT EXTREME BW 2.5L is a water-based wood paint formulated for both exterior and interior wooden surfaces. Supplied in a 2.5-litre container, this coating provides an opaque decorative finish while protecting wood from everyday wear and environmental factors. The product is intended for maintenance, renovation and new coatings on wooden elements where a uniform coloured surface and durable protection are required.

Advantages

This exterior/interior wood coating offers good opacity and colour uniformity, creating a consistent finish on timber. Its formulation balances protection and breathability to help reduce moisture-related problems in wood while maintaining a stable surface under normal weather exposure. The paint is suitable for application with brush, roller or spray equipment and is designed to promote easy maintenance and repainting in the future.

Suitable for

• Wooden façades, cladding and exterior joinery
• Interior woodwork such as panelling, doors and trim
• Renovation and maintenance of painted wooden surfaces
• New timber elements requiring a coloured protective finish

Key specifications

• Type: water-based opaque wood paint suitable for exterior and interior use
• Finish: opaque/covering colour
• Volume: 2.5 litres
• Application methods: brush, roller or spray
• Surface properties: provides protective coating with breathability to reduce moisture trapping

How to use

Prepare the surface by removing loose, flaking paint, dirt and mould; sand glossy areas to provide adhesion and ensure the substrate is dry and clean. Stir the paint thoroughly before use. Apply evenly with a brush, roller or spray, observing recommended film thickness and drying times indicated by the manufacturer. For previously uncoated or highly absorbent wood, apply a suitable primer or an initial thinner coat to achieve uniform coverage. Allow adequate drying between coats and apply additional coats as required to reach desired opacity and protection.

Usage recommendations

Store the product in a cool, frost-free place and protect from direct sunlight. Use appropriate personal protective equipment during surface preparation and application. Test the chosen colour and finish on a small area before full application to confirm adhesion and appearance on the substrate.