Paint Roller Sleeve Polax microfiber 6x30x150 mm for small rollers

Polax microfiber paint roller sleeve 6x30x150 mm is a replacement cover designed for small hand rollers. The microfiber nap ensures even paint pick-up and consistent release, suitable for water-based paints and many solvent-based coatings. Its compact dimensions make it practical for precise edging, touch-ups and painting small interior surfaces where control and minimal overspray are required.

Advantages

The microfiber construction provides uniform paint distribution and a smooth finish on semi-smooth to smooth substrates. The sleeve is washable and reusable, allowing multiple painting sessions when cleaned properly. Its small diameter and short length enable accurate application in tight areas and along trim without the need for larger tools.

Suitable for

• Touch-ups and repair work on interior walls and ceilings
• Painting narrow areas, corners and trim
• Applying water-based paints and many solvent-based coatings
• Small furniture or cabinet surfaces requiring controlled coverage

Key specifications

• Material: microfiber nap for even paint hold and release
• Inner core diameter: 6 mm (fits small roller frames)
• Nap length: 30 mm for controlled coverage on semi-smooth surfaces
• Working length: 150 mm suitable for compact roller frames
• Washer-friendly: can be cleaned for reuse depending on coating type

How to use

Fit the sleeve onto a compatible small roller frame, ensuring a snug and secure fit on the 6 mm core. Load the sleeve with paint by rolling it in a tray until evenly saturated, then remove excess by rolling on the tray’s slope. Apply paint with steady, overlapping strokes for uniform coverage; use light pressure near edges and trim to maintain control. After finishing, remove excess paint and clean the sleeve according to the paint manufacturer’s instructions—water for water-based paints and appropriate solvents for compatible coatings—before storing it dry.

Usage recommendations

Use with a compatible small roller frame and a tray designed for short sleeves. Test the sleeve with the chosen coating on a small area to confirm adhesion and finish. Rinse promptly after use when working with water-based paints; for solvent-based coatings follow safety and cleaning guidance for the solvent in use.