Ceramic saw blade Polax Diamon 125 x 1.4 x 22.23 mm for tile and ceramic cutting

Ceramic Polax diamond disc 125 x 1.4 x 22.23 mm (MPN 54-110) is designed for precise cutting of tiles, ceramics and similar brittle materials. With a 125 mm diameter, 22.23 mm bore and a reduced 1.4 mm thickness, the blade produces narrow, accurate cuts with minimal material waste. The turbo-shaped cutting edge and optimized construction permit dry cutting without external cooling while maintaining active cooling during operation. The disc is compatible with angle grinders and can also be used on bricks, paving slabs, concrete and other building materials.

Advantages

The thin 1.4 mm body reduces load on the grinder and enables fast, precise cutting with low risk of chipping. A 10 mm cutting edge height combined with wear-resistant materials ensures long service life and consistent cutting quality. Rated for peripheral speeds up to 80 m/s and maximum rotational speed up to 12,000 rpm, the blade provides efficient performance across a range of jobs.

Suitable for

• Cutting ceramic tiles and porcelain
• Dry cutting applications with angle grinders
• Working with bricks and paving slabs
• Cutting concrete and other hard building materials

Key specifications

• Diameter: 125 mm
• Thickness: 1.4 mm
• Bore: 22.23 mm
• Cutting edge height: 10 mm
• Maximum peripheral speed: 80 m/s
• Maximum rotational speed: 12,000 rpm
• MPN: 54-110
• EAN: 6900223362678

How to use

Mount the disc on a compatible angle grinder with a 22.23 mm arbor and ensure the blade is secured according to the grinder manufacturer's instructions. Use appropriate personal protective equipment (safety glasses, gloves, hearing protection). For dry cutting of ceramic tiles, operate the grinder at speeds up to the rated maximum and let the turbo-shaped edge provide active cooling; avoid excessive side pressure and feed the material steadily for clean cuts. When cutting other materials such as concrete or brick, adjust feed rate and speed to the material hardness and check the blade periodically for wear.

Usage recommendations

Use the Polax diamond disc primarily for dry cutting of tiles and ceramics where a thin kerf and minimal chipping are required. For extended life, avoid overheating by allowing short pauses during prolonged continuous cuts and inspect the blade regularly; switch to wet cutting only if the specific job or material requires additional cooling and if the grinder supports it.