Abrasive sanding sponge Polax Slīpšvamme P60 100×70×25 mm for manual sanding, grit P60

Abrasive sanding sponge Polax Slīpšvamme P60 100×70×25 mm is a hand-held sanding tool with a flexible foam core and coarse P60 grit designed for medium-to-heavy material removal. The sponge conforms to contours and edges, allowing controlled sanding of wood, painted surfaces, plaster and other common substrates. Its durable abrasive coating provides stable performance over multiple uses and simplifies preparation work before painting, refinishing or surface shaping.

Advantages

The flexible foam body follows curved profiles and hard-to-reach corners while maintaining even pressure on the abrasive surface. Coarse P60 grit removes material efficiently for fast smoothing and shaping. The compact dimensions 100×70×25 mm make the sponge easy to hold for manual sanding and reduce hand fatigue during extended work. The abrasive layer is resistant to premature wear, providing consistent abrasion for a longer lifetime compared with untreated foam blocks.

Suitable for

• Sanding raw and planed wood before finishing
• Removing old paint, primer or rough plaster spots
• Smoothing filler and jointing compounds
• Shaping edges and contours on furniture and carpentry work
• Small touch-up and repair jobs on interior surfaces

Key specifications

• Dimensions: 100 × 70 × 25 mm
• Abrasive grain: P60 (coarse)
• Core: flexible closed-cell foam for contour conformity
• Abrasive type: durable coated abrasive surface for manual sanding
• Primary materials: suitable for wood, paint layers, plaster and fillers
• Intended use: manual hand sanding

How to use

Hold the sanding sponge with a firm but comfortable grip and work with even, controlled strokes along or across the surface depending on the task. Apply moderate pressure when removing material; reduce pressure when working near edges or on thin layers to avoid gouging. For curved profiles and tight corners, let the foam conform to the shape rather than forcing a rigid angle. Replace the sponge when the abrasive surface becomes visibly worn or glazing reduces cutting effectiveness.

Usage recommendations

Use P60 grit for initial material removal and shaping; move to finer grits for smoothing and finishing. Keep the sponge clean by tapping out dust or rinsing with water if compatible with the worked material, then allow to dry completely before reuse. Wear appropriate personal protective equipment such as dust mask and eye protection when sanding.