Filament Poly Fiberon PETG-ESD 1.75 mm 0.5 kg — Black

Poly Fiberon PETG-ESD 1.75 mm 0.5 kg — Black is a conductive-safe PETG filament formulated for FDM/FFF 3D printing. Supplied on a 0.5 kg spool with 1.75 mm diameter, this black PETG-ESD material is developed to reduce electrostatic discharge compared with standard PETG while maintaining typical PETG mechanical and thermal characteristics. It offers good layer adhesion, dimensional stability and is aimed at producing functional parts, housings and fixtures where electrostatic control is required.

Advantages

Poly Fiberon PETG-ESD combines the ease of printing associated with PETG with enhanced electrostatic dissipation properties. The filament prints within standard PETG temperature ranges and provides reliable interlayer bonding and low warping. Its conductive-safe formulation helps reduce static buildup on printed components without significantly altering PETG's toughness and chemical resistance. The 1.75 mm diameter and consistent spool weight support predictable extrusion and repeatable results on most consumer and professional FDM printers.

Suitable for

• Functional prototypes and end-use parts requiring reduced static charge
• Electronic enclosures and internal fixtures where ESD control is beneficial
• Tooling, jigs and assembly aids in environments sensitive to electrostatic discharge
• Mechanical parts that need PETG-like impact resistance and dimensional stability

Key specifications

• Material: PETG with electrostatic dissipation (ESD) properties
• Diameter: 1.75 mm
• Spool weight: 0.5 kg
• Colour: Black
• Compatibility: FDM/FFF 3D printers designed for 1.75 mm filament
• Typical print behaviour: good layer adhesion, low warping, dimensional stability
• Recommended temperature range: follows common PETG printing temperatures (refer to printer and slicer settings)

How to use

Load the 1.75 mm filament onto a compatible FDM/FFF printer and set nozzle and bed temperatures according to PETG guidelines for your machine and slicer profile. Calibrate extrusion multiplier and flow to account for the filament's specific characteristics, then perform a small test print to confirm adhesion and dimensional accuracy. Use adequate cooling and retraction settings to minimise stringing while preserving interlayer strength. Allow printed parts to cool gradually to reduce internal stresses.

Usage recommendations

Store the filament in a dry environment and, if possible, in sealed packaging with desiccant to maintain print quality. When printing parts intended to control electrostatic discharge, verify surface resistance and ESD performance in the final application and follow relevant ESD handling and testing procedures for assembled components.