PLA Filament Poly Panchroma Starlight 1.75 mm, 1 kg, color Jupiter

Poly Panchroma Starlight PLA filament in 1.75 mm diameter on a 1 kg spool, color Jupiter, is a standard PLA material formulated for FDM/FFF 3D printers that accept 1.75 mm filament. It is intended for general-purpose 3D printing including visual models, prototypes and small functional parts. The filament is supplied on a compact spool and is compatible with common desktop printers that use standard PLA printing parameters.

Advantages

The PLA composition provides reliable layer adhesion, low warping and straightforward printability on most consumer and prosumer FDM/FFF machines. The Jupiter color offers a multi-tonal metallic or pearlescent appearance suitable for decorative and display prints. The 1.75 mm diameter ensures consistent extrusion when kept dry and used with printers calibrated for that diameter.

Suitable for

• Prototyping and concept models
• Decorative items, display pieces and miniatures
• Small functional parts and fixtures with moderate mechanical requirements
• Educational projects and hobbyist prints

Key specifications

• Material type: PLA (polylactic acid)
• Nominal diameter: 1.75 mm
• Spool weight: 1 kg
• Finish: multi-tonal/metallic pearlescent appearance (Jupiter color)
• Compatibility: FDM/FFF 3D printers accepting 1.75 mm filament

How to use

Load the filament into a compatible 3D printer set for 1.75 mm filament and use standard PLA print settings as a starting point. Typical extruder temperatures for PLA range from approximately 190–220 °C depending on printer and model geometry; bed temperature is usually 0–60 °C or use a lightly heated/PEI-coated bed for better adhesion. Calibrate extrusion multiplier and retraction settings to match your machine and the filament spool to avoid over- or under-extrusion. Store the filament in a dry environment or a sealed bag with desiccant when not in use to maintain dimensional stability and prevent moisture-related print issues.

Usage recommendations

For best surface finish and color effect, print at moderate speeds (30–60 mm/s) and adjust cooling to optimize layer appearance. Keep filament dry and pre-dry if necessary before printing in high-humidity environments.