3D printing filament power plant PT812936 1.75 mm, 1 kg, Black

3D printing filament PLA, 1.75 mm, 1 kg spool in black. The filament is made of PLA (polylactic acid), a plant-based and biodegradable thermoplastic suitable for most FDM/FFF 3D printers using 1.75 mm filament. Designed for general-purpose printing, it offers consistent extrusion, low-odor printing and straightforward handling. Recommended printing temperature range is 200–210°C and the spool weight is 1 kg.

Advantages

PLA filament is easy to print and requires relatively low extrusion temperatures (typically 190–220°C). It flows smoothly through the nozzle with minimal clogging, emits little to no unpleasant odor, and shows very low shrinkage on cooling. As a plant-based material it is biodegradable and well suited for educational projects, prototyping and decorative items. The filament is supplied on a standard 195 × 195 × 60 mm spool for convenient mounting and handling.

Suitable for

• Prototypes and concept models
• Decorative items and souvenirs
• Toys and non-load-bearing consumer goods
• Educational projects and hobby prints
• Small detailed parts and flat-surface prints

Key specifications

• Material: PLA (polylactic acid)
• Diameter: 1.75 mm
• Weight: 1 kg
• Spool dimensions: 195 × 195 × 60 mm
• Color: Black
• Recommended extrusion temperature: 200–210°C
• Platform temperature: 50–65°C (optional, recommended for better adhesion)
• Flexibility: Low
• Heat resistance: Low (may deform above ~50°C)
• Printability: Easy

How to use

Load the 1.75 mm PLA filament into an FDM/FFF 3D printer following the printer manufacturer's instructions. Set the nozzle temperature to the recommended range (200–210°C) and, if used, set the heated bed to 50–65°C for improved first-layer adhesion. Print at moderate speeds appropriate for your printer and model; adjust retraction and cooling settings to reduce stringing and preserve small details. After printing, allow parts to cool before removal to reduce deformation.

Usage recommendations

Store the PLA spool in a dry place or sealed container with desiccant to prevent moisture absorption. Avoid prolonged exposure to temperatures above 50°C and direct sunlight. For functional parts requiring higher impact resistance or heat tolerance, consider alternative materials.