Hammer Drill POWERPLUS POWC10200 — 600W, corded electric impact drill

POWERPLUS POWC10200 is a corded electric 600 W impact (hammer) drill designed for drilling and light chiselling in masonry, concrete, wood and metal. The compact, lightweight design and keyless chuck make it suitable for renovation, installation and DIY tasks that require continuous power and simple bit changes. The tool features adjustable rotation speed and an impact function for efficient percussive drilling with common drill bits and accessories. Supplied with an auxiliary handle and depth stop for greater control and consistent hole depth.

Advantages

The 600 W motor delivers sufficient power for small to medium on-site tasks while remaining compact and easy to handle. The keyless chuck enables quick bit replacement without additional tools. Variable speed control and an on/off impact mode let you adapt performance to material and application. The auxiliary handle improves stability during drilling and the depth stop ensures repeatable hole depths. The corded design provides continuous operation without battery changes.

Suitable for

• Drilling holes in wood for fittings and joinery
• Drilling and light chiselling in masonry and concrete for anchors and installations
• Drilling metal and plastic with appropriate drill bits
• General renovation and DIY tasks requiring a compact, corded impact drill

Key specifications

• Rated power: 600 W
• Rated voltage: 230–240 V AC, 50 Hz
• Rotation speed range: 0–3000 min⁻¹
• Impact rate: up to 41,000 impacts per minute
• Drilling capacities: concrete 10 mm, steel 6 mm, wood 20 mm, stone 6 mm
• Maximum recommended drill bit diameter: 13 mm
• Minimum drill bit diameter: 2 mm
• Keyless chuck for quick bit changes
• Power cable length: 2 m
• Sound power level: 97 dB(A)

How to use

Select a suitable drill bit for the material and insert it into the keyless chuck, ensuring it is tightened securely. Choose the required rotation speed and enable the impact mode when working on masonry or concrete; switch to non-impact rotation for wood, metal or plastic. Use the auxiliary handle to stabilise the tool and set the depth stop to control drilling depth. Apply steady, moderate pressure and allow the drill to do the work; avoid forcing the tool to prevent wear or bit breakage. After use, clean the chuck and vents and store the drill in a dry place.

Usage recommendations

For best results when drilling concrete or masonry, start with a smaller pilot hole and use the impact mode at a medium to high speed. Wear appropriate personal protective equipment such as safety glasses, hearing protection and dust mask when drilling. Maintain a clear workspace and unplug the drill before changing bits or performing maintenance.