Power tool hammer drill POWERPLUS POWX0281 — 1050W, 48,000 strokes/min, 35mm wood, 16mm concrete, 13mm steel

The POWERPLUS POWX0281 hammer drill combines a 1050W motor with a high-impact mechanism delivering up to 48,000 strokes per minute. This tool is designed to provide steady power for a range of drilling tasks, offering rated capacities of 35 mm in wood, 16 mm in concrete and 13 mm in steel. The compact form and straightforward controls make it suitable for both professional tradespeople and experienced DIY users who need reliable performance for construction, renovation and fixture installation jobs.

Advantages

The 1050W motor ensures continuous power under load while the high stroke rate improves material removal and drilling speed in masonry and metal. The drill’s rated capacities allow handling of common construction and renovation tasks without frequent tool changes. Ergonomic handling and a balanced weight distribution reduce user fatigue during extended use. Speed control and a dedicated hammer function provide versatility across materials.

Suitable for

• Drilling holes in wood for carpentry and furniture assembly
• Drilling into concrete and masonry for anchors, wall plugs and fastenings
• Metalworking tasks requiring holes in steel up to the stated diameter
• General renovation and installation of fixtures and fittings

Key specifications

• Motor power: 1050 W
• Impact rate: up to 48,000 strokes per minute
• Rated drilling capacity in wood: 35 mm
• Rated drilling capacity in concrete: 16 mm
• Rated drilling capacity in steel: 13 mm
• Operation modes: rotary drilling and hammer drilling
• Speed control: variable speed trigger or dial (model dependent)

How to use

Select the appropriate drill bit for the material and confirm it is securely fastened in the chuck. Choose the operation mode—hammer function for masonry or rotary for wood and metal—then set the variable speed according to the diameter and material hardness. Position the drill perpendicular to the work surface, apply steady pressure without forcing the tool, and allow the motor and impact mechanism to do the work. Periodically retract the bit to clear debris and reduce heat buildup during longer holes. After use, remove the bit, unplug the tool and store it in a dry place.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses, hearing protection and dust mask when drilling. For masonry work, start with a smaller pilot hole if required and use correct anchor sizes for secure fixings. Maintain the tool by keeping vents clear of dust and inspecting the power cord and chuck for wear before each use.