Electrical Cable Pozostali H03VV-F (OMY) 2x0.75 mm² 300/300V 100 m white

Flexible electrical cable Pozostali H03VV-F (OMY) 2x0.75 mm² 300/300V on a 100 m reel in white is designed for light-duty portable appliances and internal wiring where a flexible PVC-insulated cable is required. The cable has two flexible conductors with 0.75 mm² cross-sectional area each, insulated and jacketed in PVC suitable for standard household and office environments. Rated at 300/300V, it is intended for low-voltage applications that require bendable, easy-to-route cable with basic mechanical protection.

Advantages

This H03VV-F (OMY) cable offers flexibility and ease of installation due to its fine-stranded conductors and soft PVC sheath. Supplied on a 100 m reel, it reduces the need for frequent joins and supports longer continuous runs for small appliances and portable equipment. The white outer sheath provides a neutral appearance for visible installs and interior wiring, and the cable meets typical specifications for low-voltage flexible wiring.

Suitable for

• Light-duty household appliances such as lamps, radios, and small kitchen devices
• Portable equipment and extension leads with limited mechanical stress
• Internal wiring in furniture, office equipment, and display installations
• Temporary wiring and test setups where a flexible, easy-to-route cable is needed

When it may not be suitable

This cable is not intended for fixed outdoor installations or locations exposed to direct sunlight, moisture, or significant mechanical wear. It is also unsuitable for mains wiring that requires higher cross-sectional areas for continuous high-current loads, or for installations demanding enhanced fire resistance, oil resistance, or special temperatures beyond standard PVC ratings.

Key specifications

• Conductor configuration: 2 cores
• Conductor cross-section: 0.75 mm² per core
• Insulation and sheath material: PVC (flexible)
• Voltage rating: 300/300 V
• Reel length: 100 m
• Colour: white
• Application class: flexible low-voltage cable for light-duty use

How to use

Measure and cut the required length from the 100 m reel, taking care to leave slack for connections and routing. Strip the insulation from each conductor according to the terminal manufacturer's recommended stripping length, avoiding damage to the fine strands. Use appropriate connectors, crimp terminals or screw terminals rated for 0.75 mm² conductors and secure the cable to prevent strain on the connections. Avoid tight bends close to the terminations and maintain recommended routing clearances from heat sources and sharp edges.

What to consider before purchase

• Ensure 0.75 mm² conductor size is adequate for the intended current load and local wiring regulations
• Confirm that the 300/300 V rating meets the voltage requirements of your application
• Consider environmental conditions: PVC sheath is not suitable for prolonged outdoor exposure or oil/chemical contact
• Plan cable routing and connector types compatible with fine-stranded flexible conductors

Usage recommendations

For best results use this Pozostali H03VV-F cable for indoor, light-duty and portable applications. When making permanent connections, use appropriate strain relief and cable clamps and follow local electrical safety standards. If higher current capacity, additional mechanical protection, or outdoor durability is required, select a cable with a larger conductor size or different sheath material.