PREMIUMCORD monitor cable HQ Coax 2x ferrite, SVGA 15-pin, DDC2, 3xCoax+8-core, 2 m

PREMIUMCORD monitor cable HQ Coax 2x ferrite, SVGA 15-pin, DDC2, 3xCoax+8-core, 2 m is an analog SVGA cable designed for reliable transmission of VGA video signals between a PC graphics output and CRT or VGA-compatible displays. The cable combines three coaxial conductors for red, green and blue channels with eight additional signal cores for horizontal/vertical sync and other analog lines, and includes two ferrite cores to reduce electromagnetic interference over its 2 meter length. DDC2 support enables basic display data communication for compatible devices.

Advantages

The construction with three coaxial conductors helps preserve signal integrity for each primary color channel, reducing crosstalk and maintaining image clarity at typical VGA resolutions. Two built-in ferrite cores help suppress high-frequency interference from surrounding equipment, improving stability of the analog signal. A standard 15-pin SVGA (D-Sub) connector provides broad compatibility with legacy graphics cards and displays, while DDC2 support allows simple exchange of monitor identification and basic settings with compatible systems.

Suitable for

• Connecting desktop PCs or older laptops with a 15-pin VGA output to CRT monitors or VGA-capable projectors and LCDs
• Applications where analog VGA video is required for legacy systems, instrumentation, or industrial equipment
• Setups where a 2 m cable length is sufficient to bridge the distance between computer and display

When it may not be suitable

This analog VGA cable does not support digital video interfaces such as DVI, HDMI or DisplayPort, and therefore is unsuitable for carrying purely digital signals or for use with displays that accept only digital inputs. For very high-resolution or long-distance runs where digital interfaces or active signal boosters are needed, this passive 2 m coax/VGA cable may not meet performance requirements.

Key specifications

• Cable type: Analog VGA (D-Sub 15-pin, SVGA)
• Conductor structure: 3 coaxial cores for RGB + 8 additional signal cores
• Ferrite suppression: 2 ferrite cores integrated
• Data channel support: DDC2 (monitor data channel support)
• Length: 2 meters

How to use

Connect the 15-pin SVGA connector to the VGA output on your computer and the matching connector on the display, ensuring the thumbscrews are tightened to secure the connection. If the display supports DDC2, the connected devices will exchange basic monitor data automatically; no additional configuration is generally required. Route the cable away from power supplies and sources of strong electromagnetic noise where possible to maximize the benefit of the ferrite cores and maintain stable image quality.

What to consider before purchase

• Check that both your source and display have 15-pin VGA (D-Sub) ports; this cable is analog only
• Confirm that a 2 m cable length is appropriate for your spatial setup
• Verify whether DDC2 support is sufficient for your monitor settings or if extended EDID/DDC features are required

Usage recommendations

For best results, use the cable for short to medium runs (up to 2 m) and avoid bundling it with high-current power cables. Tighten the connector screws to secure the mechanical connection and keep the ferrite cores positioned near the ends if you reterminate or extend the cable, as this helps maintain EMI suppression.