Leave your address - as soon as the price of the product goes down, you'll know about it right away
USB 2.0 repeater cable PREMIUMCORD ku2rep10ab 10 m A male to B male
USB 2.0 repeater cable PREMIUMCORD ku2rep10ab 10 m A male to B male
In cart {{totalProductsCount}} item(s)
Your cart is empty
USB 2.0 repeater cable PREMIUMCORD ku2rep10ab 10 m A male to B male
Leave your address - as soon as the price of the product goes down, you'll know about it right away
USB 2.0 repeater cable PREMIUMCORD ku2rep10ab 10 m A male to B male
USB 2.0 repeater cable PREMIUMCORD ku2rep10ab 10 m A male to B male
USB 2.0 repeater cable PREMIUMCORD ku2rep10ab, 10 m, A male to B male. This active USB 2.0 extension cable is designed to extend a USB connection up to 10 metres while maintaining signal integrity and supported data rates for USB 1.1 and USB 2.0 devices. The cable draws power from the host USB port and does not require an external power supply.
The PREMIUMCORD ku2rep10ab supports data rates of 1.5 Mbps, 12 Mbps and 480 Mbps and uses an active repeater to preserve signal quality over the 10 m length. It features a standard A-male connector for the host and a B-male connector for the device, simplifying connection to printers, scanners and other peripherals that use Type A and Type B ports. No additional power adapter is necessary because the cable is bus-powered.
Plug the A-male connector into an available USB port on the host computer and connect the B-male connector to the target USB device. Ensure both ends are fully seated. The cable is active and will draw power from the host port; no separate power connection is needed. If the connected device requires more power than the host port can provide, use a powered USB hub or a device-specific power source.
Use this active repeater cable to extend USB 1.1 and 2.0 devices up to 10 m. For reliable operation, avoid coiling the cable tightly and keep it away from strong electromagnetic interference sources. For devices with higher power demands, consider a powered hub.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}