LED strip Prescot EH007-050-8-WW99 12V SMD2835 60 LED/m 4.8W/m IP63 warm 2800–3200K 220 lm/m (price per 1 m)

The Prescot EH007-050-8-WW99 LED strip is a flexible 12V lighting solution that uses SMD2835 diodes at a density of 60 LEDs per metre. Consuming 4.8 W per metre, the strip produces warm white light in the 2800–3200 K range and delivers approximately 220 lumens per metre. The strip is rated IP63, offering protection against water spray and solid particles, and is supplied and priced per metre for custom-length installations.

Advantages

This LED strip combines low power consumption with high LED density to provide even warm illumination suitable for ambient and accent lighting. Its SMD2835 LEDs ensure consistent colour temperature along the length, while the IP63 rating gives basic splash resistance for indoor and semi-protected outdoor applications. The 12V operating voltage simplifies installation with common low-voltage LED drivers and reduces the need for on-site voltage conversion.

Suitable for

• Under-cabinet and kitchen countertop lighting
• Accent and cove lighting in living rooms and bedrooms
• Retail display and shelving illumination
• Decorative trim and stair riser lighting

Key specifications

• Operating voltage: 12 V DC
• LED type: SMD2835
• LED density: 60 LEDs per metre
• Power consumption: 4.8 W per metre
• Light output: ~220 lumens per metre
• Colour temperature: 2800–3200 K (warm white)
• Ingress protection: IP63 (splash resistant)
• Flexible strip construction for curved and linear installations

How to use

Measure and cut the LED strip at designated cut points to achieve the required length, then connect to a compatible 12 V DC power supply or driver that can handle the total wattage of the installed length. Ensure correct polarity when connecting wires and, where necessary, use appropriate connectors or soldering for secure joints. Mount the strip on a clean, dry surface using the adhesive backing or mechanical clips; allow the adhesive to bond fully before final placement. For installations exposed to water spray or higher humidity, place the strip in a suitable protective channel or profile to maintain durability.

Usage recommendations

For optimal performance and longevity, match the total strip wattage to a power supply with 10–20% overhead, plan for adequate heat dissipation using aluminium profiles when used for long runs, and avoid installing the strip in direct contact with liquids despite its IP63 spray resistance. Use dimmable drivers if adjustable warm lighting is required.