Power Supply Prescot IP-15-12 15W 12V IP67 for LED Strips

The Prescot IP-15-12 is an AC/DC power supply that provides 15W output at 12V DC with IP67 protection. It is designed to deliver stable low-voltage power for LED strips and compact lighting installations where moisture resistance and a small footprint are important. The unit is suitable for use in damp indoor areas, sheltered outdoor fixtures and signage applications that require a waterproof, constant-voltage power source.

Advantages

The power supply offers full IP67 ingress protection, ensuring resistance to dust and temporary immersion in water, which extends suitability for damp and outdoor locations. With a 12V DC constant-voltage output and 15W power rating it supports short runs of LED strips and small lighting loads without the need for bulky transformers. The compact, sealed enclosure simplifies installation in confined spaces and reduces the need for additional weatherproof housings.

Suitable for

• Indoor damp locations such as kitchens, bathrooms, and utility rooms
• Sheltered outdoor installations including under-eaves and covered signage
• LED strip lighting for cabinets, displays and accent lighting
• Small illuminated signs and backlighting applications

Key specifications

• Output voltage: 12V DC
• Maximum output power: 15W
• Ingress protection: IP67 (dust-tight and water immersion resistant)
• Type: AC to DC constant-voltage power supply for LED lighting
• Form factor: compact sealed enclosure suitable for surface mounting or recessing in protected cavities

How to use

Mount the power supply in a location that remains protected from direct water jets and excessive heat, allowing for adequate ventilation around the enclosure. Connect the AC mains input to the designated terminals following local wiring regulations and ensure the supply is disconnected during installation. Connect the 12V DC output to the LED strip or lighting load, observing correct polarity. Verify the total wattage of connected LED strips does not exceed 15W and test the installation before final sealing or placing into permanent position.

Usage recommendations

Use short continuous runs of LED strip or multiple parallel feeds rather than long single runs to prevent voltage drop. Where the installation is exposed to heavy rain or direct water jets, provide additional mechanical protection or place the unit in a fully enclosed, ventilated box rated for outdoor use. Match wiring gauge to the load and run length to minimise losses and maintain stable 12V output to the LEDs.