3D printing material 3D Prima 12812 PETG Black 1 kg 100 mm/sec

PrimaCreator 3D Prima 12812 PETG Black is a 1 kg spool of PETG filament formulated for reliable extrusion and durable 3D prints. Specified for printing at up to 100 mm/sec, this black PETG balances strength, flexibility and ease of use. The filament is supplied on an eco-friendly paper spool and is intended for general-purpose and functional printing where higher toughness and low odor are required.

Advantages

PrimaCreator Value PETG delivers a combination of mechanical strength and good layer adhesion while remaining straightforward to print. The material produces minimal odor during printing and is suitable for parts that require impact resistance and dimensional stability. Supplied on recycled paper spools, the product reduces plastic packaging waste and provides convenient storage for the filament.

Suitable for

• Functional prototypes and mechanical parts
• End-use components that require toughness and some flexibility
• Larger prints where low-warp and good layer adhesion are needed
• General-purpose prints for desktop FDM/FFF printers

Key specifications

• Material: PETG (Polyethylene Terephthalate Glycol-modified)
• Colour: Black
• Net weight: 1 kg
• Recommended maximum print speed: 100 mm/sec
• Packaging: paper spool made from recycled paper
• Suitable printer type: FDM/FFF desktop 3D printers

How to use

Load the 1 kg spool onto the printer’s filament holder and route the filament through the extruder according to your printer’s instructions. Use a clean, dry filament path to avoid jams. Begin printing with commonly recommended PETG settings: nozzle temperature typically between 230–250°C and bed temperature between 60–80°C (adjust per your printer and model). Start with moderate print speeds and increase toward 100 mm/sec only after confirming consistent extrusion and part quality. Ensure proper first-layer adhesion by adjusting bed leveling, nozzle distance and using suitable adhesion aids if necessary.

Usage recommendations

Store the spool in a dry environment or sealed container with desiccant when not in use to preserve filament quality. For optimal surface finish and dimensional accuracy, tune retraction and cooling settings per your printer; reduce part cooling for improved layer bonding if higher strength is required. Test-print critical parts and adjust temperatures and speeds to match your specific printer and model geometry.