Air Purifier Prime3 SAP51

The Prime3 SAP51 air purifier uses a seven-stage purification system to remove dust, bacteria, viruses and various allergens. It combines five filters (pre-filter, cold catalysis, activated carbon, antibacterial and HEPA), an ionizer and a UV lamp to reduce suspended dust (PM2.5), microorganisms and volatile organic compounds in indoor air. The device is intended for use in rooms up to 40 m2 and delivers up to 165 m3 of purified air per hour according to its CADR-related performance.

Advantages

The SAP51 model provides multi-stage filtration that targets large particles, odors and chemical pollutants as well as biological contaminants. High ionization output and a supporting UV lamp add secondary sterilization, while an electronic control panel with remote control, three fan speeds and a timer enable simple operation. The purifier operates quietly and is designed for continuous domestic use.

Suitable for

• Living rooms and bedrooms up to 40 m2
• Homes with pets (hair and dander reduction)
• Allergy-prone households (pollen, dust mites, mold spores)
• Urban apartments exposed to smog and exhaust odors

Key specifications

• 7-stage air purification process
• Pre-filter
• Cold catalysis filter
• Activated carbon filter
• Antibacterial filter
• HEPA filter
• UV lamp
• Negative ion generator (ionization up to 10 × 106 ions/s)
• PM2.5 removal efficiency up to 99.95%
• Bacteria and virus removal efficiency up to 99.99%
• Formaldehyde and VOC reduction up to 99%
• Recommended area: up to 40 m2
• Air delivery (CADR-related): up to 165 m3/h
• Three operating speeds (basic 500 rpm, medium 700 rpm, high 900 rpm)
• Noise level: 25–40 dB (depending on speed)
• Timer: 0.5–12 hours
• Remote control included (batteries supplied)
• Rated power: 43 W
• Power supply: 220–240 V ~ 50/60 Hz
• Dimensions: 33 × 18 × 50.5 cm
• Weight: 4.8 kg

How to use

Place the Prime3 SAP51 on a flat surface in the room to be cleaned, keeping some clearance around the intake and outlet. Use the control panel or included remote control to switch the unit on, select one of three fan speeds and set the timer if required. Monitor the air quality indicator to check ambient air status; the device will show a color scale from green (good) to red (poor). Replace filters according to the manufacturer’s maintenance schedule and clean the pre-filter regularly to maintain performance.

Usage recommendations

For optimal results, run the purifier continuously at a low or medium speed in occupied rooms, ventilate periodically to reduce indoor VOCs, and follow the filter replacement intervals stated in the manual. Keep the unit away from direct heat sources and ensure the UV lamp and ionizer functions are used according to safety instructions.