PRO set of scrapers with replaceable blade 40, 60, 80 cm

The PRO set of scrapers with replaceable blade 40, 60, 80 cm includes three straight scrapers in different working widths designed for spreading, leveling and smoothing fillers, plasters and putty on walls and ceilings. Each scraper is fitted with a replaceable metal or plastic edge that can be swapped quickly to restore a straight, durable finishing edge. The set covers narrow, medium and wide working areas so users can choose the appropriate tool for seams, edges and large surface levelling.

Advantages

The three-sizes set gives consistent results across varied surface widths while reducing the need to buy individual tools. Replaceable blades simplify maintenance and extend tool life: worn or damaged edges can be changed without replacing the entire scraper. Straight rigid blades provide a uniform finish and good control when applying and smoothing compound. The handles are shaped for a firm grip and allow stable pressure transfer from hand to blade.

Suitable for

• Applying and levelling gypsum and cement-based fillers on walls and ceilings
• Smoothing putty and joint compound over seams and fasteners
• Preparing large surfaces for painting or wallpapering
• DIY renovation tasks and professional plastering work

Key specifications

• Set contents: three scrapers with replaceable blade edges in lengths 40 cm, 60 cm and 80 cm
• Blade type: replaceable straight edge suitable for metal or durable plastic inserts
• Working widths: 400 mm, 600 mm, 800 mm
• Handle: ergonomic design for secure grip and even pressure distribution
• Primary use: spreading, levelling and smoothing fillers, plasters and putty

How to use

Select the scraper size that matches the surface area to be treated. Fit a new replaceable blade if the edge is worn: loosen the retaining screws or clips, remove the old edge and insert the replacement so it aligns evenly with the scraper body. Load compound onto the blade edge and apply across the surface with steady, even pressure, holding the handle at a slight angle to control thickness. For best results, work in overlapping passes and finish with long, smooth strokes to achieve a uniform surface.

Usage recommendations

Use the 40 cm scraper for narrow areas, corners and patch repairs; the 60 cm scraper for medium surfaces and trim work; and the 80 cm scraper for large walls and ceilings. Keep spare replacement blades on hand and clean the blade after each use to prevent material buildup. Inspect fastenings regularly and tighten as needed to ensure blade alignment and safe operation.