Rotary Laser Level PRO HILE D400 with Tripod and Grade Rod

Rotary Laser Level PRO HILE D400 with Tripod and Grade Rod is a rotating reference system designed for horizontal and basic vertical alignment tasks on construction and renovation sites. The kit combines a self-contained rotating laser emitter, an adjustable tripod and a telescopic grade rod to create a stable, hands-free reference for levelling floors, aligning walls, setting elevations and checking site grade. The system is intended for use in interior fit-out, site preparation and short-range outdoor grade control where a visible rotating beam and reliable mounting are required.

Advantages

The PRO HILE D400 provides continuous 360° rotation for a consistent horizontal reference and enables single-operator workflows when mounted on the supplied tripod. The included grade rod allows quick elevation transfer from the laser plane to the work surface. Compact transport case dimensions, straightforward setup and clear user controls reduce on-site setup time. The design focuses on practicality and routine accuracy for general construction and renovation tasks.

Suitable for

• Floor levelling and screed control
• Interior partition and wall alignment
• Setting elevations for drainage and site grading
• Aligning suspended ceilings and lighting runs
• Exterior short-range level checks and layout

Key specifications

• Rotating laser emitter providing a continuous 360° horizontal reference
• Tripod with adjustable height for stable mounting on varied surfaces
• Telescopic grade rod for elevation measurement and transfer
• Visible laser plane suitable for indoor and short-range outdoor use
• Controls for power and rotation speed or mode selection (model-dependent)
• Battery-powered operation for cordless, on-site use

How to use

Place the tripod on a firm surface and adjust its legs to a working height. Mount the rotary laser on the tripod and level it according to the instrument's levelling indicators or automatic levelling function. Power the unit on and select the required rotation mode. Use the rotating beam as a reference and move the telescopic grade rod to the working points to read or transfer elevations. For basic vertical alignment, position the instrument and rotate or tilt as required following the manufacturer's leveling procedure. After work, power off, collapse the tripod and grade rod, and store the kit in its transport case.

Usage recommendations

For accurate results, check instrument calibration before first use and after any significant impact. Use the tripod on stable ground and avoid exposing the laser emitter to direct water or prolonged outdoor exposure without appropriate protection. When working outdoors at longer distances, use a compatible detector/receiver if the laser beam visibility is reduced. Observe local safety rules for laser devices and avoid direct eye exposure to the beam.