Procab audio cable CLA610/10 — 3.5mm jack (male) stereo to 3.5mm jack (male) stereo, 10 m

Procab CLA610/10 is a 10-metre stereo patch cable with 3.5 mm (1/8") male TRS connectors at both ends. It is designed to transmit left and right audio channels through a single flexible conductor, enabling reliable connections between portable audio players, laptops, mixers and playback devices. The cable construction provides a stable signal path for studio patching, live sound setups and consumer audio use where an extended reach is required.

Advantages

The CLA610/10 offers a long 10 m length that reduces the need for intermediate adapters or extension stages, while maintaining stereo separation via TRS wiring. Its compact 3.5 mm male-to-male connectors make it compatible with a wide range of portable and rack-mounted equipment. The cable's flexibility facilitates routing in tight spaces and on stage, and the robust connector housings ensure consistent contact and low risk of accidental disconnection.

Suitable for

• Connecting smartphones, tablets or laptops to mixers and audio interfaces
• Routing stereo signals between playback devices and PA systems in live sound setups
• Studio patching where a long stereo lead is needed without conversion
• Home audio connections between media players and amplifiers or powered speakers

Key specifications

• Cable length: 10 metres
• Connector type: 3.5 mm (1/8") TRS male to 3.5 mm TRS male
• Signal: stereo, left and right channels
• Cable use: audio patching and interconnects
• Construction: flexible audio cable with insulated conductors and molded connector housings

How to use

Insert one 3.5 mm TRS male connector into the headphone or line output of the source device and the other into the line input or auxiliary input of the receiving device. Ensure connectors are fully seated to avoid intermittent contact. For best results in live or studio environments, route the cable away from power supplies and AC mains cabling to minimise hum and interference. Coil excess cable neatly to prevent tangles and strain on connector ends.

Usage recommendations

Use the CLA610/10 for connections that require both left and right channels over a single lead and where a longer reach is necessary. Avoid excessive bending at the connector neck and do not pull the cable forcefully from the cable body. If adapting to balanced or XLR systems is needed, use an appropriate DI box or adapter rather than forcing direct connections.