Procab XLR male to 1/4" jack male stereo cable, Ultrafelex, 1.5 m

Procab XLR male to 1/4" jack male stereo cable, Ultrafelex, 1.5 m is a balanced audio lead designed to connect professional audio equipment where a male XLR to a stereo 1/4" (6.35 mm) jack is required. The 1.5 m length provides a compact connection between microphones, mixers, audio interfaces and stage devices. The cable features a flexible Ultrafelex jacket that facilitates routing and handling in live and studio environments while maintaining signal integrity for balanced audio transmission.

Advantages

The cable combines a professional male XLR connector with a stereo 1/4" jack, enabling compatibility between XLR-equipped devices and equipment that accepts a TRS jack. The Ultrafelex jacket increases flexibility, resists kinking and simplifies cable management on stage or in studio racks. Balanced construction reduces noise and interference over the 1.5 m run, preserving audio clarity for microphones, line outputs and balanced inputs.

Suitable for

• Connecting microphones with XLR outputs to mixers or interfaces with 1/4" TRS inputs
• Routing balanced line signals between stage equipment and desk channels
• Short interconnects in studio setups and live sound rigs

Key specifications

• Connector A: Male XLR (3-pin)
• Connector B: 1/4" (6.35 mm) male stereo (TRS) jack
• Cable length: 1.5 m
• Cable jacket: Ultrafelex flexible outer sheath
• Wiring: Balanced audio pair with ground
• Intended use: Microphone and line-level balanced connections

How to use

Insert the male XLR into the XLR output of the source device and plug the 1/4" stereo jack into the TRS input of the destination device. Ensure both devices are powered down or levels are set low when making connections to avoid audio transients. Confirm that the receiving input is configured for a balanced TRS connection to maintain proper signal polarity and noise rejection. Route the cable to avoid close parallel runs with mains or lighting cables to minimize interference.

Usage recommendations

For reliable performance, use this cable for short, balanced connections up to 1.5 m. Avoid sharp bends near the connectors and secure excess cable with soft ties. Regularly inspect connector contacts and the Ultrafelex jacket for wear; clean contacts with appropriate contact cleaner if oxidation occurs.