Procab CLP209 cable gender changer, 2 x 3.5 mm to 3.5 mm, gold-plated contacts, black/dark blue

Procab CLP209 cable gender changer converts two 3.5 mm stereo inputs into a single 3.5 mm stereo output. The adapter has gold‑plated contacts to reduce oxidation and improve signal transfer. Finished in black and dark blue, the CLP209 is designed for audio routing and adapting cable terminations in studio, live sound and consumer audio setups. The body is flexible to reduce strain on connections while a firm molding over the connector provides mechanical isolation from the ground and a secure fit.

Advantages

The gold‑plated contacts provide improved contact reliability and corrosion resistance compared with unplated connectors. A flexible adapter body relieves cable strain at the connection point, reducing the risk of cable damage. Firm overmolding around the connector gives a solid mechanical feel and helps isolate the connector from external mechanical and electrical interference.

Suitable for

• Splitting or combining headphone signals from DJ mixers or portable audio players
• Routing stereo signals between consumer audio devices and studio equipment
• Temporary or permanent cable adaptations in rehearsal and live sound setups

Key specifications

• Connector configuration: two 3.5 mm female to one 3.5 mm male stereo
• Contact plating: gold
• Housing colors: black and dark blue
• Flexible body to reduce strain on cables
• Firm molded connector area for mechanical isolation

How to use

Insert the male 3.5 mm connector into the output or source device and plug the two 3.5 mm plugs into the adapter’s female sockets. Ensure connections are fully seated to maintain reliable signal transfer. The adapter can be left in place for repeated use; avoid excessive bending at the connector to prolong service life. Use the flexible section to position cables so that tension is not directly applied to the connector.

Usage recommendations

Use the CLP209 for short interconnections and signal routing where channel combining or splitting is required. Avoid using the adapter as a permanent solution in high‑movement installations; secure cables and relieve strain where possible to maintain contact integrity and prevent wear.