Drill bit set Proline 10854, 2 pieces, length 30 mm

Proline 10854 is a set of 2 drill bits, each 30 mm long, designed for short, precise drilling in light-duty materials. The compact length makes these bits suitable for tight spaces and controlled depth drilling. The set is compatible with standard bit-mounted hand or power drivers and is intended for drilling in woodworking, plastics and thin metal sheets where small-diameter, short-reach holes are required.

Advantages

The two-piece set offers spare capacity and quick replacement during work. Short 30 mm length reduces bit flex and improves accuracy in shallow drilling operations. Compatibility with standard bit mounts allows use with a wide range of drivers and adapters. The compact design simplifies handling and storage when working in confined or recessed areas.

Suitable for

• Drilling pilot holes in wood and joinery tasks
• Creating or enlarging holes in plastic components
• Light sheet metal drilling and thin metalwork
• Work in confined spaces, recessed fittings and shallow depths

Key specifications

• Set contents: 2 drill bits
• Overall length: 30 mm per bit
• Intended materials: wood, plastics, thin metal sheets
• Mounting: standard bit mounting compatible with hand and power drivers
• Use category: light-duty, short-reach drilling

How to use

Select a drill bit suited to the required hole size and insert it into a compatible bit holder or driver. Secure the bit in the chuck or quick-change holder according to the driver manufacturer’s instructions. Use steady, moderate feed pressure and appropriate rotational speed for the material: lower speeds for metals, higher speeds for wood and plastics. For accurate shallow holes, mark drilling depth and consider using a depth stop or tape on the bit. Withdraw the bit periodically to clear chips when drilling plastics or metal to avoid clogging and overheating.

Usage recommendations

For best results, match rotational speed and feed to the material being drilled, keep bits sharp, and use cutting fluid or cooling when drilling thin metal sheets to extend bit life. Store the set in a dry place to prevent corrosion and inspect bits before use for signs of wear or damage.