Glue & paint roller Proline 41262 — 1 pc, handheld roller for adhesives and paint

Proline 41262 glue & paint roller is a handheld roller supplied as a single piece, designed for applying adhesives and paints to smooth surfaces. The roller cover combines polyamide and acrylic fibres with a 9 mm pile for consistent material pickup and release. It is intended for tasks where controlled, even spreading is required, such as renovation work, bonding, and coating applications on gypsum and gypsum board surfaces. The short, lightweight handle with a Ø 6 mm steel wire frame provides compact handling and access to confined areas while remaining suitable for small to medium DIY and professional jobs.

Advantages

The polyamide and acrylic pile offers good affinity with water-based products, supporting smooth application of emulsion, latex, thixotropic and silicate paints and many common adhesives. The 9 mm pile length balances material capacity and control to reduce splatter and ensure uniform coverage. A short, light handle and a thin Ø 6 mm steel wire provide accurate pressure control and make the roller easy to manoeuvre in tight or vertical areas. Supplied as one handheld unit, it is ready to use with typical paint trays or adhesive reservoirs.

Suitable for

• Applying emulsion, latex, thixotropic and silicate paints on smooth substrates
• Spreading adhesives for bonding operations on plaster and gypsum board
• Small to medium renovation and repair projects
• Touch-up and finishing work where controlled, even coverage is required

Key specifications

• Roller material: polyamide and acrylic blend
• Pile length: 9 mm
• Handle: short, lightweight
• Frame: Ø 6 mm steel wire
• Pack quantity: 1 handheld roller
• Recommended substrates: smooth surfaces such as gypsum and gypsum board

How to use

Select an appropriate paint or adhesive compatible with a polyamide/acrylic roller. Pour the paint or adhesive into a tray or reservoir and load the roller evenly by rolling it through the material until saturation is uniform. Apply with steady, overlapping strokes to achieve an even layer; avoid excessive pressure to prevent streaking. For adhesive application, maintain constant contact and consistent speed to ensure a uniform bond line. After use, clean the roller according to the material type—water-based products can be rinsed from the polyamide/acrylic cover—allow it to dry fully before storage.

Usage recommendations

For best results on gypsum and gypsum board, use emulsion, latex, thixotropic or silicate paints as recommended. Test on a small area to confirm compatibility and desired finish. Replace the roller cover when fibre wear or clogging affects coverage uniformity. Store dry and protected from direct sunlight to extend service life.