Car Jack Stands Proline 2T height 265–418 mm model 46912

Proline 2T car jack stands model 46912 provide stable, adjustable vehicle support for maintenance tasks with a rated load capacity of 2 tonnes and an adjustable height range of 265–418 mm. The stands feature a wide base for ground contact and a ratchet/post height adjustment mechanism with ten discrete positions, enabling secure height selection for a variety of service and repair scenarios. These stands are intended to support a raised vehicle after initial lifting with a jack, offering a hands-free, mechanical support solution during inspections, underbody work or wheel changes.

Advantages

The Proline jack stands combine a compact footprint with a wide support base to improve contact stability on level surfaces. The ratchet/post mechanism provides ten-step height adjustment for precise setting within the 265–418 mm range and a locking pawl to reduce the chance of unintended descent. Constructed from durable steel, the stands are designed to sustain the specified 2-tonne load while providing repeatable, low-maintenance operation for routine workshop or home garage use.

Suitable for

• Passenger cars and light commercial vehicles within the 2-tonne per-stand rating when used in pairs
• Tyre and wheel changes where the vehicle needs secure support
• Underbody inspections, brake work and suspension maintenance
• Routine servicing and light repairs in home garages and professional workshops

Key specifications

• Load capacity: 2 tonnes per stand
• Adjustable height range: 265–418 mm
• Height adjustment: 10-step ratchet/post mechanism
• Material: steel construction for load-bearing components
• Base: wide, four-point contact footprint for improved stability

How to use

Position the vehicle on a level, firm surface and apply the parking brake. After lifting the vehicle with a suitable jack to the desired height, place one jack stand under each designated support point on the vehicle chassis or axle according to the vehicle manufacturer's guidance. Use the ratchet/post mechanism to raise the stand to the required height and ensure the locking pawl engages. Lower the jack slowly until the vehicle weight rests securely on the stands, then verify stability before working beneath or around the vehicle. When finished, raise the vehicle slightly with the jack to remove the stands, retract the ratchet to its lowest position and store the stands in a dry location.

Usage recommendations

Use jack stands in matched pairs, never exceed the rated load capacity, and consult the vehicle owner's manual for recommended support points. Inspect stands for damage, corrosion, or wear before each use and avoid placing stands on soft or uneven ground.