Drill bits Proline Urbis HSS for metal 3.2 mm set of 3

Drill bits for metal with a 135° split-point angle and adjustable chisel angle, made from high-quality HSS steel. Designed for precise drilling in metal, these Proline Urbis HSS metal bits have a diameter of 3.2 mm, a working length of 36 mm and an overall length of 63 mm. The set contains three identical bits (set of 3) suitable for use with standard drill chucks.

Advantages

High-speed steel (HSS) construction provides good wear resistance and heat tolerance for metal drilling. The 135° point with adjustable chisel angle reduces walking and improves centring on metal surfaces. Compact overall length and defined working length make these bits suitable for use in hand drills and drill presses where controlled depth is required.

Suitable for

• Drilling holes in steel and other ferrous metals
• General metal fabrication and repair work
• Use in hand-held drills and small drill presses

Key specifications

• Brand: Proline
• Model / MPN: 5153562
• EAN: 5903755153562
• Material: HSS (high-speed steel)
• Diameter: 3.2 mm
• Working length: 36 mm
• Total length: 63 mm
• Point angle: 135° (split point) with adjustable chisel angle
• Set quantity: 3 pieces

How to use

Secure the appropriate drill bit in the drill chuck and tighten firmly. Mark the drilling position on the metal surface and, if needed, use a centre punch to prevent slipping. Start drilling at low speed to create a guide, then increase speed according to the metal thickness and drill manufacturer recommendations. Use cutting fluid or coolant when drilling harder metals to reduce heat and extend bit life. Withdraw the bit periodically to clear chips.

Usage recommendations

For best results, use these HSS drill bits with a sharp point and correct feed pressure; apply cutting fluid on steel; avoid excessive speed and overheating to maintain bit performance and longevity.