Drill bit Proline Spiral Urbis 10 x 460 mm model 5269102 for concrete and masonry

Proline Spiral Drill Bit 10 x 460 mm with a threaded spiral blade designed for drilling softwood, hardwood and glued workpieces. The bit features a hex shank for secure fitting in standard chucks and drivers and is identified by model 5269102 (EAN 5903755269102).

Advantages

The threaded spiral tip pulls the bit into the material for efficient penetration and reduced effort. The long 460 mm length enables deep-hole drilling in beams and laminated panels. A hex shank ensures a stable, slip-resistant connection to the drill or driver, improving torque transfer and control.

Suitable for

• Drilling through softwoods such as pine and spruce
• Drilling hardwoods like oak and beech
• Making deep holes in glued or laminated wood panels
• Use with handheld drills and impact drivers that accept hex shanks

Key specifications

• Brand: Proline
• Model / MPN: 5269102
• EAN: 5903755269102
• Type: Spiral drill bit with threaded (self-feeding) tip
• Material suitability: Softwood, hardwood, glued/laminated wood
• Shank: Hex
• Size: 10 mm diameter x 460 mm length

How to use

Mark the drilling point and secure the workpiece to prevent movement. Fit the hex shank into a compatible drill or driver and tighten the chuck or holder. Start drilling at low speed to engage the threaded tip, then increase speed as the bit advances. Withdraw the bit periodically to clear chips when drilling deep holes. After use, clean wood debris from the spiral flutes and store the bit dry to prevent corrosion.

Usage recommendations

Use appropriate personal protective equipment (safety glasses and gloves) and select a drill with sufficient power for long 460 mm bits. For clean entry and exit holes, consider using backing support on the workpiece and moderate drilling speed to reduce splintering.