Mixing Drill Proline 5410252 — shaft 10×50 mm, speed 300–600 rpm

The Proline Mixing Drill 5410252 is designed for mixing semi-liquid construction materials. It is intended for professionals and DIY users who need consistent blending of levelling compounds, self-levelling screeds, bitumen-based products (adhesives, abizol, disperbit) and similar viscous materials. The unit accepts a 10 x 50 mm shaft and operates at an adjustable speed range between 300 and 600 rpm, providing controlled mixing for batches weighing approximately 5 to 25 kg. The mixing head has a diameter of 100 mm and an overall length of 500 mm, offering a balance between thorough agitation and compatibility with standard buckets and containers.

Advantages

The mixing drill delivers steady low-speed rotation suitable for semi-liquid materials, reducing air entrainment and improving homogeneity. Its 10 x 50 mm shaft size ensures secure attachment to compatible drill motors and stands. The 100 mm diameter impeller provides effective circulation and prevents material settling during mixing. Adjustable speed from 300 to 600 rpm allows tuning of shear and flow for different products and batch sizes, while the 500 mm length reaches deeper into containers to mix larger volumes without excessive splashing.

Suitable for

• Mixing levelling compounds and floor screeds
• Preparing self-levelling materials for floor installation
• Stirring bitumen-based adhesives and sealants
• Blending medium-sized batches (5–25 kg) of viscous construction materials

Key specifications

• Shaft dimension: 10 x 50 mm
• Operating speed: 300–600 rpm (adjustable)
• Impeller diameter: 100 mm
• Total length: 500 mm
• Recommended batch weight: 5–25 kg
• Designed for semi-liquid and viscous construction materials

How to use

Attach the mixing head securely to a compatible drill or mixer with a 10 x 50 mm shaft connection. Place the tool into the container with the material, ensuring the impeller is fully submerged before starting the motor to avoid splashing. Start at the lower end of the speed range (around 300 rpm) and increase gradually up to 600 rpm as needed to achieve a uniform consistency. Move the mixer gently through the material to ensure even distribution and avoid prolonged contact with the container walls. After use, stop the motor before removing the mixing head and clean the impeller and shaft promptly according to the material manufacturer’s recommendations.

Usage recommendations

Use appropriate personal protective equipment, such as gloves and eye protection, and follow the safety instructions of both the mixing drill and the material manufacturer. For best results with self-levelling compounds and bitumen-based products, mix in batches within the recommended 5–25 kg range and adjust speed to minimize air incorporation while ensuring complete blending.