Drill bit Proline Urbis 12×600 mm SDS+ — for rotary hammer drilling

Proline SDS+ drill bit 12×600 mm is designed for industrial and professional use, suitable for drilling concrete, granite and other natural stones. A specially shaped carbide tip increases service life and drilling efficiency while improving centring accuracy and reducing load. The double spiral flute accelerates dust removal. The bit is compatible with rotary hammers that accept an SDS+ shank.

Advantages

The carbide insert with a special geometry provides extended durability and consistent cutting performance. Double-spiral flutes evacuate debris quickly, reducing heat build-up and improving drilling speed. The SDS+ shank ensures secure tool retention and rapid bit changes. The 12×600 mm size offers deep drilling capacity for anchor and through-hole applications in masonry and stone.

Suitable for

• Drilling holes in concrete for anchors and dowels
• Drilling in granite and other natural stone
• Deep through-holes in masonry and structural elements

Key specifications

• Brand: Proline
• Model: Urbis Proline 12×600 mm SDS+
• Shank type: SDS+
• Diameter × length: 12 × 600 mm
• Intended use: Industrial and professional rotary hammer drilling
• MPN: 5912602
• EAN: 5903755912602

How to use

Install the drill bit into a rotary hammer with an SDS+ chuck until it locks securely. Select an appropriate drilling speed and apply steady axial pressure; allow the tool to perform the work without excessive force. Periodically withdraw the bit to clear dust and check progress when drilling deep holes. For reinforced concrete, use intermittent drilling and cooling intervals to avoid overheating.

Usage recommendations

Use personal protective equipment (safety goggles, gloves, hearing protection) and ensure the work area is properly supported. Match drill diameter and length to anchor and fixture specifications. Replace the bit when excessive wear reduces drilling accuracy or increases operating temperature.